Overview
The Bilstein 24-185172 is a 4600 Series front shock absorber with a 2 in body diameter, a monotube body and a gas charge. The manufacturer fitment list places it on the 1994–2002 Dodge Ram 2500 and Dodge Ram 3500 in Base trim.
The gas-charged monotube carries heat from the damping oil to the outer surface of the shock body. A dividing piston lets the oil expand as it warms, which helps limit foaming and keeps damping steady as temperatures rise. The tube is formed by extrusion and holds a tight peak-to-valley tolerance, and the piston head can be tuned for compression and rebound damping separately.
Because this is a front-position shock, match it to the front axle of the truck you are repairing.
Key features
- Gas-charged monotube body that moves heat from the oil to the outer tube
- Dividing piston lets damping oil expand as the shock warms
- Piston head tunable for compression and rebound damping separately
- Extruded tube with a tight peak-to-valley tolerance
- Yellow finish with boots included on the shock
Front shock replacement tips
Gas-charged shocks can carry a lot of heat after a drive, so let the body cool before loosening the fasteners. Work on one side at a time, and keep the old unit in place until the new one is ready to bolt in. This keeps the truck stable and gives you a reference for mounting angles.
Before fitting, wipe the mounting points clean and inspect the upper and lower bushings for cracks or flattening. Look at the protective boot for tears, since a damaged boot lets grit reach the shaft seal. A careful check of the mounts often prevents noise and uneven wear after the replacement.
- Let the body cool before removing
- Check upper and lower mounts
- Inspect the boot for tears
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185172 |
| UPC | 651860418544 |
| Shock series | 4600 Series |
| Position | Front |
| Body type | Monotube |
| Body diameter | 2 in |
| Charge | Gas charged |
| Reservoir | No |
| Finish | Yellow |
| Boots included | Yes |
| Fitment type | Direct fit |
| Lift height | 0 in. lift/drop |
Vehicle fitment
The manufacturer fitment list names the 1994–2002 Dodge Ram 2500 (Base) and the 1994–2002 Dodge Ram 3500 (Base) for this shock. Both entries are for the Base trim.
The list does not include the Ram 1500, the Dakota or other Dodge models, and no years outside 1994–2002 are listed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gas-charged shocks can run hot after a drive, so let the body cool before you unbolt it from the truck.
What’s included
The package holds one shock absorber with its boot.
Not included: mounting hardware, so confirm what brackets and fasteners your installation needs before starting work.









