Overview
The Fabtech FTS7188 is a front performance twin tube shock absorber with a 2.38 inch hydraulic body. It fits Ford F-250 and F-350 Super Duty trucks, the 2007–2008 and 2012 Jeep Wrangler (JK) and the 2007–2013 Toyota Tundra. It is rated for a w/6 in. lift.
The shock pairs a lower mount S38 with an upper mount EB1 and has 11.28 in. of travel. The valving and foam insert are the same as the rest of the Performance Shock range, and the specs table gives each measurement.
Key features
- High Flow 9 stage valving
- Closed cell foam insert
- 2.38 inch twin tube hydraulic shock body
- 9/16 inch chrome hardened piston rod
- 1 3/8 inch OD piston
- Valving Fabtech describes as reducing shock fade at high speeds
Front shock loads on heavy trucks
Front shocks on Super Duty trucks and Toyota Tundra pickups carry significant weight at the front end, so the shock is working against both bounce and load. Damping matters when towing or when driving on rough surfaces, because the front wheels can otherwise skip or pitch under braking. A worn shock can lead to uneven tire wear and a loose feel on the highway.
Matching a front shock to how the truck is used helps. Drivers who tow regularly may consider how valving affects load control, while off-road drivers focus on rebound control after landings. Inspect the upper and lower mount bushings whenever a front shock is replaced, and check that the bolts are tight once the truck is back on the ground.
- Check mounts for wear
- Inspect tires for cupping
- Replace front shocks in pairs
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7188 |
| UPC | 674866014503 |
| Position | Front |
| Shock series | Performance Shock |
| Shock type | Twin tube, hydraulic, no reservoir |
| Shock body diameter | 2.38 inch |
| Collapsed length | 27.37 in. |
| Extended length | 16.09 in. |
| Travel length | 11.28 in. |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High Flow 9 stage |
| Insert | Closed cell foam |
| Lower mount | S38 |
| Upper mount | EB1 |
| Lift rating | w/6 in. lift |
| Finish | White powdercoat with blue Fabtech logo |
Vehicle fitment
The manufacturer list includes the 2005–2013 and 2017–2018 Ford F-250 Super Duty, the 2005–2008 and 2017–2018 Ford F-350 Super Duty, the 2007–2008 and 2012 Jeep Wrangler (JK) in Rubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X and X trims, and the 2007–2013 Toyota Tundra in Base, Limited, Platinum and SR5 trims.
Ford F-250 model years 2014–2016 and F-350 model years 2009–2016 are not covered, and neither are Wrangler JK years other than 2007–2008 and 2012. Confirm the model year and trim before ordering.
Installation notes
This is a front shock, so check the lower mount S38 against your axle’s existing mount before fitting.
What’s included
The package contains one shock absorber.
Not included: Check what your mounts need before installing.








