Overview
The King Shocks 25001-144 is a rear shock from the OEM Performance Series, built for the 2007–2017 Toyota Tundra in the trims named for it. It uses a remote reservoir, which adds fluid capacity to the rear suspension, with a 10.13 inch travel length and a 25.880 inch extended length. It is a rear position unit.
The OEM Performance Series is built with the materials and tolerances of high-end race shocks and was tuned through real-world testing. Rear kits in this line allow a 15% travel increase, and the shocks suit both daily driving and prerunning.
Key features
- Remote reservoir with external fluid storage, which King says improves heat dissipation for sustained damping.
- Rear travel increase of 15%.
- Serviceable design with valve adjustments made using simple hand tools.
- Damping curves and spring rates developed for the application through real-world testing.
- Bolt-on design that King says requires no cutting or welding to the vehicle.
- Gas charged construction.
Rear shock care and removal
A rear shock on a full-size truck handles the axle movement and the load from the bed and any towing. Because the Tundra rear end works under weight, the shock body, mounts and bushings should be inspected whenever the rear wheels come off. Clean dirt from the body and look for oil residue near the seal, since those signs show up before a shock fails outright.
When removing a gas-charged rear shock, support the axle and keep the body upright. Avoid heat near the shock and do not strike the body, because damage to the seal can cause fluid loss. Replacing rear shocks as a pair helps the rear end settle evenly over bumps.
- Support the axle before removing a rear shock
- Inspect the mounts and bushings during replacement
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-144 |
| UPC | 700005378103 |
| Product line | OEM Performance Series |
| Shock series | Performance Series |
| Position | Rear |
| Design | Shock with remote reservoir |
| Hydraulic / gas charged | Gas charged |
| Extended length | 25.880 inch |
| Collapsed length | 15.750 (no unit given) |
| Travel length | 10.13 inch |
| Lift height | 0 in. lift/drop |
| Fitment type | Direct fit |
| Quantity | Pair |
Vehicle fitment
It fits the 2007–2017 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
Tundra years outside the 2007–2017 range are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This rear shock is a direct bolt-on replacement. The valve can be adjusted later with simple hand tools. Gas-charged units hold pressure, so keep the body intact and avoid applying heat during removal.
What’s included
The quantity listed is a pair of rear shocks with remote reservoirs.
Not included: Confirm the contents before installation, including any mounting hardware.












