Overview
The Pro Comp 13-90348 is an axle U-bolt from Pro Comp Suspension and is sold as a universal fit part. It clamps an axle to a leaf spring pack, and Pro Comp’s suspension systems are engineered for steering and suspension geometry, with tire clearance and on-road driving in mind.
Choosing a U-bolt for your axle
A U-bolt clamps the axle housing to the leaf spring pack, so it carries real load every time the vehicle moves. On a lifted or re-tired rig, the clamp also works with the spring pads and axle seat to keep the axle centered under the springs. A good fit depends on matching the bolt diameter, thread length and nut style to the tube and spring pack beneath it.
When choosing a U-bolt, measure the axle tube first, then the spring pack height, since a lift or new springs can change the required length. Replacing all the U-bolts on an axle at the same time keeps the clamping force even. Nuts and spring plates are often replaced with them, so check those parts for corrosion too.
- Check the tube diameter before buying
- Torque nuts evenly in a cross pattern
- Re-check nut tightness after the first few drives
- Inspect for thread damage and rust
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13-90348 |
| Type | Axle U-bolt kit |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit part, so it is not tied to a vehicle model, year or axle. A U-bolt has to match the axle tube diameter and the spring pack it clamps, so check those dimensions against your setup before ordering.







