Overview
The Trail Gear 110042-1-KIT is a U-bolt flip kit with two flip plates, four 9/16 in bolts with nuts and washers, and a listed spring pack capacity of up to 2 in. thick. The kit moves the U-bolt position so the spring bolt points up and out of the way, and it requires crossover steering for installation.
Each kit contains two flip plates and four 9/16 in bolts with nuts and washers. Front kits take spring packs up to 2 in thick and rear kits up to 2.5 in thick, so confirm the axle position before matching the kit to your vehicle.
Stock U-bolts face down and can catch rock and trail debris. Flipping the U-bolt improves ground clearance and reduces damage to the threaded section of the bolt.
Key features
- Two flip plates included
- Four 9/16 in bolts with nuts and washers
- Spring pack capacity listed at up to 2 in. thick
- Crossover steering required for installation
- Unpainted finish
Things to check first
A flip kit changes where the U-bolt sits, so the spring bolt points up and out of the way. Before fitting, look at the axle and spring pack to make sure there is room for the plates and nuts above the spring. Ground clearance gained by flipping depends on the vehicle and the tire size, so check clearance at the frame and differential once the kit is in.
Inspect the spring pack, shock mounts and any brake lines near the U-bolt before starting. Crossover steering work is a separate job and often needs its own parts, so plan for that before beginning. Once the kit is installed, check the nuts after the first few drives to confirm they still hold the plates firmly.
- Confirm axle position before fitting
- Check clearance at the frame and differential
- Inspect brake lines near the U-bolt
- Plan for crossover steering parts
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110042-1-KIT |
| UPC | 70000621385 |
| Spring pack capacity | Up to 2 in. thick |
| Bolts | Four 9/16 in with nuts and washers |
| Plates | Two flip plates |
| Finish | Unpainted |
| Steering | Crossover steering required |
Vehicle fitment
Use the spring pack thickness and axle position to narrow the match, and check the year, model and trim of your vehicle.
Front and rear kits have different spring pack limits, so confirm the axle position this kit is for before buying.
Installation notes
Crossover steering is required for installation of this flip kit. Check spring pack thickness against the 2 in. rating before fitting.
What’s included
Two flip plates, four 9/16 in bolts with nuts, and washers.
Not included: Crossover steering components are required but are not part of this kit.








