Overview
The Pro Comp 13-90438 is a U-bolt for the leaf spring and axle connection. Pro Comp designs its suspension parts with steering and suspension geometry in mind.
A U-bolt clamps the axle to the springs or to a block, so its length, bend and thread must match the stack it holds. Size, material and the axle it suits should be checked against the parts you are replacing.
Match the U-bolt to your axle diameter and spring pack before ordering.
Key features
- Replacement U-bolt for the spring and axle connection
- Pro Comp part number 13-90438
Checking fit and clamp load
The U-bolt sets the clamp load that holds the axle to the springs, so its condition matters on every trail run. Look for flattened threads, a bend that has opened or closed, and corrosion where the bolt enters the perch. Any of these can let the axle rotate or the spring slip, which changes the axle angle and the steering feel.
Upgrades in the same area often need attention together. Lift blocks, longer shocks and new springs change the thread length and bend required, so check those parts before choosing a U-bolt. Using the same nut and washer style on each side keeps the clamp load even.
- Confirm thread length with lift blocks installed
- Check for rust at the perches
- Tighten nuts evenly across both sides
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13-90438 |
| Type | U-bolt |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check the axle diameter and spring pack it needs.
U-bolts must match the axle diameter and the spring or block stack, so do not assume fit from the part name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tighten the nuts to the correct torque at normal ride height, and recheck them after the first drive. Make sure the thread length works with any lift block in the stack.
What’s included
One U-bolt.
Not included: nuts and washers.








