Overview
The CSU-D15-2 from California Super Trucks is a U-bolt kit that packs four U-bolts, eight tall Nylock nuts and eight flat washers together. Each piece is listed under one part number, so the hardware is packaged as one set.
Measure the axle and spring pack before ordering, because a U-bolt kit only works when those dimensions match.
Measuring before you buy
A U-bolt kit only works when the clamp matches the axle and springs it secures. Start by measuring the axle tube diameter and the spring pack height, then check that the U-bolt legs reach through the spring and plate with enough thread left for the nuts. Mismatched dimensions can leave the clamp loose, which lets the axle move and wears the spring seats.
If the spring pack has changed, such as after a re-arch or a new set of leaves, check the U-bolts again before installing. Tall Nylock nuts hold their grip well when they are fresh, so replace them with new nuts rather than reusing old ones. After the first few drives, re-check the torque and look for shifting around the axle seats.
- Confirm axle tube diameter
- Check spring pack height and plate fit
- Use fresh Nylock nuts
- Re-torque after initial driving
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSU-D15-2 |
| UPC | 70000443937 |
| Type | U-bolt kit |
| U-bolts | Four |
| Nylock tall nuts | Eight |
| Thick flat washers | Eight |
Vehicle fitment
This kit is sold as direct fit, but no vehicle year, model or chassis code is attached to it. Match your own axle and spring measurements before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes four U-bolts, eight tall Nylock nuts and eight flat washers.









