Overview
The Pro Comp Suspension 220210 is a single steering stabilizer shock supplied as the cylinder only. It bolts to the stock mounts and is a direct-fit design. Brackets are not included.
Pro Comp’s ES2000 series is built as a steering stabilizer to improve handling, reduce wheel vibration and lessen bump steer. Match the stock mount location to your truck before installing the cylinder.
Key features
- Single steering stabilizer shock
- Cylinder only
- Bolts to stock mounts
- Direct-fit type listed
Before you buy
A steering stabilizer damps the side-to-side movement of the front axle, so it works against the forces that build when a tire hits a bump or when the steering is loaded off-road. Its job is to keep the steering calm, not to correct a worn or loose linkage. If the steering wanders or the wheel shakes after a stabilizer is fitted, the stabilizer is usually not the cause and the tie rods, ball joints and steering box should be inspected.
When choosing a stabilizer, the stock mount location and the axle layout matter more than the shock itself. Some trucks use a single mount on the axle or frame and others have a relocated bracket for a lift. Measure the mount spacing, check that the cylinder’s travel suits the steering angle, and make sure the bolts and bushings are in good condition before the new cylinder goes on.
- Check the stock mounts for cracks and wear
- Inspect bushings and bolts after the first few drives
- Look for fluid leaks at the cylinder seals
- Recheck fasteners after rough trail use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 220210 |
| UPC | 614901030631 |
| Type | Single |
| Series | ES2000 |
| Supplied as | Cylinder only |
| Brackets | Not included |
| Fitment type | Direct fit |
Vehicle fitment
No vehicle is named for this cylinder. Confirm fit for your vehicle’s year, model and trim before ordering, and match the stock mount location to the steering layout before installation.
Confirm your vehicle’s year, model and trim before ordering, and check the stock mounts for wear.
What’s included
One steering stabilizer shock cylinder.
Not included: brackets.












