Overview
The Pro Comp PRO-X 927503B is a gas charged, nitrogen stabilized twin tube shock absorber for the rear of lifted trucks. It measures 27.8 inches extended and 16.3 inches collapsed, with 11.45 inches of travel. It fits the Nissan Titan in model years 2004 to 2015 and 2017 to 2018.
The PRO-X is designed for trucks that see mostly paved roads with occasional off-road trips. Its 10 stage velocity sensitive valving suits a range of road conditions, and the 5/8 inch chrome hardened piston rod with a Teflon rebound stop handles demanding driving. The design gives a comfortable highway ride.
Key features
- Gas charged with a nitrogen stabilized charge
- Twin tube design
- 10 stage velocity sensitive valving
- 1-3/8 inch nylon banded piston
- 5/8 inch chrome hardened shaft
- Teflon rebound stop
- Black powder coat finish
- Eyelet mounts at both ends for rear use
Eyelet mounts and bushings
Eyelet mounts use a round bushing pressed into the shock body, and the bushing carries the shock’s load while letting it pivot. Over time rubber bushings can crack, flatten or take a set, which adds play and noise at the mount. Inspect the bushings each time the rear suspension is serviced, and compare the old bushing with the new one before pressing it in.
Rear shocks on a Titan often sit in a crowded area near the frame and the exhaust, so check clearance through the full stroke. A new shock that sits differently can rub a bracket or a line, so cycle the suspension by hand before driving. Confirm the lengths against the old shock and tighten the mounting hardware to the vehicle’s service specification.
- Check bushings for cracks or flattening
- Cycle the suspension by hand before driving
- Confirm clearance near the frame and exhaust
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 927503B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged |
| Charge | Nitrogen stabilized |
| Location | Rear |
| Extended length | 27.8 in |
| Collapsed length | 16.3 in |
| Travel length | 11.45 in |
| Body diameter | 2.0 in |
| Upper and lower mounts | Eyelet |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Valving | Velocity sensitive, 10 stage |
| Rebound stop | Teflon |
| Finish | Black powder coat |
| Sold as | Individually |
Vehicle fitment
It fits the Nissan Titan in model years 2004 to 2015 and 2017 to 2018, across the Titan trims covered by that range.
Model year 2016 is not covered, and no Titan years after 2018 are included. No other Nissan models are covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both ends use eyelet mounts, so compare the factory mounts on your truck with this shock before ordering. Check the 16.3 inch collapsed and 27.8 inch extended lengths against your measured mounting distance.
What’s included
One shock absorber, sold individually.
Not included: The optional shock boot, which is sold separately.









