Select your vehicle

Pro Comp Pro Runner SS Monotube Shock Absorber – ZX2108

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp Pro Runner SS front shock, part number ZX2108
  • Height-adjustable collar, patent pending, for late model coil-over strut suspensions
  • Clears 33 inch tires and keeps the factory ride height as an option
  • Fits the 2014 Chevrolet Silverado 1500 and 2014 GMC Sierra 1500

Description

Overview

The ZX2108 is a front Pro Runner SS shock absorber for the 2014 Chevrolet Silverado 1500 and the 2014 GMC Sierra 1500. It is built for late model trucks and SUVs with coil-over, strut-style independent front suspensions, and it covers a 0 to 6 inch lift range.

The SS design uses a height-adjustable collar that Pro Comp describes as patent pending and 180 degrees in rotation. The collar lets the owner raise the front of the truck up to 2 inches to clear 33 inch tires, or leave the truck at factory ride height. The shock retains the factory coil spring, and the coil is not included with the shock.

The body is nitrogen charged with a 2 inch diameter and a zinc plated, clear coated finish. The nitrogen charge limits cavitation during compression and rebound, and the valving is set for each application.

Key features

  • Front position, direct fit
  • Height-adjustable collar, patent pending
  • Raises the front up to 2 inches for 33 inch tires
  • Retains factory coil spring
  • Nitrogen charged 2 inch body with zinc plated, clear coated finish

Coil-over strut front ends

On a coil-over strut front end, the shock sits inside the spring and the strut housing carries the load. Changing the collar height moves the spring’s position, which changes the ride height and the way the front end sits over bumps. Any adjustment should be followed by a check of the bump stop and upper mount.

Changing front ride height usually affects alignment, steering feel and tire wear, so an alignment is often worth having after a collar change. Inspect the upper strut mount, the boot and the sway bar end links while the front is apart. A loose or worn strut mount can make a height change feel uneven from side to side.

  • Recheck the alignment after a height change
  • Inspect the upper strut mount
  • Check end links for play
  • Confirm the boot seals fully

Specifications

Brand Pro Comp Suspension
Part number ZX2108
UPC 614901096361
Shock series Pro Runner SS
Position Front
Lift height 0 to 6 in.
Tire clearance 33 in tires
Adjustment Height-adjustable collar, up to 2 in.
Body diameter 2 in
Charge Nitrogen, gas charged
Finish Zinc plated, clear coated
Coil spring Factory coil retained, not included

Vehicle fitment

It is a direct fit for the 2014 Chevrolet Silverado 1500 and the 2014 GMC Sierra 1500.

The list covers the 2014 model year only, so other Silverado and Sierra years are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The collar sets the front ride height, so measure the height before and after adjusting it. Check tire clearance at full steering lock after the collar is set, since the 33 inch tire figure assumes the collar is raised.

What’s included

One front Pro Runner SS shock with height-adjustable collar and boot. The coil spring is not included.

SKU: EXPZX2108 Category:

Specification

Shipping weight 8.75 lbs
Package dimensions 25.00 × 6.00 × 6.00 in
brands

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002014High Country, LT, LTZ, WT
GMC Sierra 15002014Base, SLE, SLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the ZX2108 fit a 2014 Chevrolet Silverado 1500?

Yes. It fits the 2014 Chevrolet Silverado 1500 and the 2014 GMC Sierra 1500 in the front position, with a 0 to 6 inch lift range. Check your vehicle's year, model and trim before ordering.

How far does the ZX2108 raise the front?

The height-adjustable collar raises the front up to 2 inches to clear 33 inch tires. The same collar can keep the truck at factory ride height instead, so the owner chooses the setting for the tires being run.

Does the ZX2108 include a coil spring?

No. It retains the factory coil spring, and the coil spring is not included with the shock, so the existing spring stays in use.

Does changing the collar height need an alignment?

Often yes. A change in front ride height can shift camber and caster, which affects tire wear and steering. Have the alignment checked after the collar is set, and check tire clearance at full steering lock once the truck is back on the ground.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon