Overview
The Pro Comp Pro Runner part ZX2016 is a front gas-charged monotube shock absorber with a stem-style upper mount and a loop-style lower mount. It is designed for a lift of 0 to 2 inches and measures 26.60 inches extended, 11.15 inches collapsed and 5.44 inches of travel. The specification entry marks it as not adjustable.
The Pro Runner line uses vehicle-specific ride tuning, with multi-stage valving that Pro Comp says was derived from dyno and real-world testing. The body is brushed, zinc plated and clear coated, and it is nitrogen charged, which the brand credits with reducing cavitation and shock fade during heavy use.
The travel is 5.44 in., so the extended and collapsed figures of 26.60 in. and 11.15 in. are the ones to compare with the shock you are replacing before fitting this unit.
Key features
- Front placement for a 0 to 2 inch lift
- Stem upper mount and loop lower mount
- Multi-stage valving
- Nitrogen charged, zinc plated and clear coated
- Boot included
Travel and lift on HD trucks
Heavy-duty trucks carry more weight at the front, so the shocks work through a larger share of the suspension load. With a modest lift, the shock angle changes slightly, and the bump stop and upper mount should be checked for wear. A shock with limited travel can make the suspension bottom out on large dips, which is more noticeable when the truck is loaded.
Front shocks on these trucks also work with the steering stabilizer and the tie rod ends. A worn shock can allow the front end to bounce, which can make steering feel loose and wear tires unevenly. Inspecting the related parts at the same time as the shock helps the front end stay controlled after installation.
- Check the bump stop for cracking
- Inspect the upper mount and its hardware
- Look at steering components when the front feels loose
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2016 |
| UPC | 614901024159 |
| Shock series | Pro Runner |
| Position | Front |
| Lift height | 0 to 2 in. |
| Extended length | 26.60 in. |
| Collapsed length | 11.15 in. |
| Travel | 5.44 in. |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
It fits the 2001–2003 and 2005–2006 Silverado 1500 HD and its 2007 Classic HD variant, the 1999–2004 Silverado 2500 and 2001–2010 Silverado 2500 HD with its 2007 Classic, the 2001–2006 Silverado 3500 and 2007–2010 Silverado 3500 HD, and the matching GMC Sierra 1500 HD, 2500 and 3500 models.
Silverado and Sierra 1500 models that are not HD, and years outside 1999–2010, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift range is 0 to 2 inches, so confirm your lift height and the stem and loop mount pattern before fitting.
What’s included
One front monotube shock, with its boot.




























