Overview
The Pro Comp Suspension ES3000 324510 is a front hydraulic shock absorber, sold as each. It measures 24.70 in extended and 14.52 in collapsed, with 10.18 in of travel. It has a stem upper mount and a loop lower mount, and Pro Comp rates it for a 2 to 4 in. lift. Pro Comp names no make, model or year for it.
Inside, a twin tube cellular gas body houses 10-stage velocity-sensitive valving. Its 5/8 inch chrome-hardened piston rod and Teflon rebound stop are meant for a comfortable highway ride and demanding driving, and double welded mounts add strength. The shock is finished in white and carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Stem upper mount and loop lower mount
- Front position, rated for a 2 to 4 in. lift
- Pro Comp Suspension limited lifetime warranty
Front shock fit checks
Front shock fitment depends on the axle, steering geometry and suspension height, so a shock is best judged by its dimensions and mount style. Measure the existing front shock at its mounts while the truck is at ride height, then again with the suspension fully extended and compressed if you can. These readings tell you more than a generic fitment guess.
A stem upper mount and loop lower mount are a specific combination, and the stem must line up with the upper bracket. If the old shock has been modified or the lower bracket is bent, the new shock may not sit true. Clean the mounting surfaces and replace worn bushings before installing a new unit.
- Measure the old shock at ride height
- Confirm the stem and loop mounts match the brackets
- Check the upper bracket for cracks or bending
- Clean mounting surfaces before installation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 324510 |
| UPC | 614901041996 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 24.70 in |
| Collapsed length | 14.52 in |
| Travel length | 10.18 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Lift height rating | 2 to 4 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Fitment is unknown for this part, so confirm fit for your vehicle’s year, model and trim before ordering. Compare the 24.70 in extended length and the stem upper and loop lower mounts with your current shock.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 324510.
Not included: the dust boot.









