Overview
The Pro Comp Suspension ES3000 322506 is a rear hydraulic shock absorber for Chevrolet, GMC and Toyota trucks. It fits the 1973–1986 Chevrolet C30 and the 1987 Chevrolet R30, the 1975–1978 GMC C35, the 1973–1974 GMC C35 and C3500 and the 1979–1986 GMC C3500, the 1987 GMC R3500, and the 1980–1995 Toyota Pickup in its Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo versions.
The shock uses factory upper and lower mounts and is rated for 0 to 2 in. of lift. Its lengths are vehicle specific. The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. The double welded mounts and the Pro Comp Suspension limited lifetime warranty complete the package.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rated for 0 to 2 in. of lift
- Pro Comp Suspension limited lifetime warranty
Care on older trucks
Older trucks often carry years of road salt, grit and heat in their suspension, which makes shock removal harder than the part itself. Penetrating oil on the mounting bolts a day before the job helps, and a rusted bushing may need to be pressed out. Work on a level surface with the truck supported on stands, never on the shock alone.
Rear shocks on these trucks share the axle with leaf springs, so the springs and shackles should be inspected while the shock is off. Worn shackle bushings can let the axle move and shorten shock life. Clean and lubricate the threads, tighten fasteners to the vehicle’s recommended torque, and recheck them after the first few drives.
- Use penetrating oil on rusted bolts
- Support the truck on stands
- Inspect leaf spring shackles and bushings
- Recheck fasteners after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 322506 |
| UPC | 614901041613 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 0 to 2 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1973–1986 Chevrolet C30 (Cheyenne, Custom, Custom Deluxe, Deluxe, Pickup Base, Scottsdale and Silverado), the 1987 Chevrolet R30 (Custom Deluxe, Scottsdale and Silverado), the 1975–1978 GMC C35 (Base, High Sierra, Sierra Classic and Sierra Grande), the 1973–1974 GMC C35 and C3500 (Pickup Base), the 1979–1986 GMC C3500 (Base, High Sierra, Sierra Classic and Sierra Grande), the 1987 GMC R3500 (Base, High Sierra and Sierra Classic) and the 1980–1995 Toyota Pickup (Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo).
Chevrolet and GMC trucks from 1988 and later and the 1972 and earlier C30 models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This rear shock is rated for 0 to 2 in. of lift, so check the truck’s current suspension height first. Because the lengths are vehicle specific, measure the shock being removed and compare it with the one ordered.
What’s included
One shock absorber, part 322506.
Not included: the dust boot.










