Overview
The Pro Comp Suspension ES3000 325504 is a hydraulic shock absorber from the ES3000 Series with loop mounts at both ends. It measures 25.74 in extended and 15.49 in collapsed, with 10.25 in of travel. No make, model or year is named for this part number, so the lengths and mount style are the main points to check against your vehicle.
Pro Comp builds the ES3000 around a twin tube cellular gas design with 10-stage velocity-sensitive valving. The 5/8 inch chrome-hardened piston rod and Teflon rebound stop are meant for comfortable highway driving as well as demanding conditions, and the double welded mounts add strength. The shock is finished in white and is covered by the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- White finish, non-adjustable
- Pro Comp Suspension limited lifetime warranty
Loop mounts and bushings
Loop-style mounts use a rubber or polyurethane bushing through a round eye at each end of the shock. The bushing isolates road noise and absorbs small vibrations, but it wears over time. Cracking, flattening or a loose fit in the eye signal a failing mount even when the shock body still looks sound.
Because loop mounts are sensitive to alignment, confirm the new shock sits square between its mounting points before tightening. A bent bracket or misaligned bushing can cause binding and early wear. Replacement bushings are often sold separately and can be fitted with the shock, which helps the new unit work as intended.
- Inspect bushings for cracks before installing
- Check mounting brackets for bends or cracks
- Tighten fasteners firmly and recheck after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 325504 |
| UPC | 614901042191 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 25.74 in |
| Collapsed length | 15.49 in |
| Travel length | 10.25 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the 25.74 in extended and 15.49 in collapsed lengths with the shock being replaced.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 325504.
Not included: the dust boot.








