Overview
The Pro Comp Suspension ES3000 320514 is a hydraulic shock absorber from the ES3000 Series that uses factory upper and lower mounts. Its extended, collapsed and travel lengths are set to the vehicle rather than a fixed figure, and the shock is finished in white. The fixed numbers for this part are therefore the mount type and the finish, and the lengths should be checked against the truck.
The ES3000 is built as a twin tube cellular gas design. Pro Comp says its 10-stage valving responds to the road, and the 5/8 inch chrome-hardened piston rod and Teflon rebound stop support both a comfortable highway ride and demanding driving. The double welded mounts and the Pro Comp Suspension limited lifetime warranty finish the package.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
- Pro Comp Suspension limited lifetime warranty
Measuring before you buy
Shock absorbers control how quickly the springs settle after a bump, so they affect steering feel, braking dive and tire contact on washboard roads. Because this type of shock is hydraulic and non-adjustable, the setup depends on fitting it correctly to the suspension rather than dialing in damping by hand. Measure the old shock first, since length and mount type decide whether the replacement will seat without strain.
Shocks usually wear in pairs, and replacing one side alone can leave uneven damping that pulls on steering. Look for oil on the body, a clunking sound over bumps, or a bouncing ride after a dip. Off-road use, heavy loads and a lifted suspension all increase wear, so check the mounting bushings and bump stops during the same job.
- Measure the collapsed and extended lengths before ordering
- Compare upper and lower mount types on both ends
- Replace shocks in pairs on the same axle
- Plan for a separate dust boot if the old one is worn
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 320514 |
| UPC | 614901041170 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the factory upper and lower mounts and the vehicle-specific lengths with the shock you are replacing before you buy.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 320514.
Not included: the dust boot.






