Overview
It is a rear ES9000 Series gas charged shock for older Dodge trucks, the Dodge Ramcharger, the Mazda B2600, the Plymouth Trailduster and the Toyota Pickup, sold individually. It fits Dodge D100, D200 and D300 pickups from 1961 to 1971, several W-series models from 1961 to 1993, and the Toyota Pickup from 1980 to 1985.
Pro Comp rates the shock for a 4 inch lift. Its lengths are vehicle specific, with 25.74 inches extended and 15.49 inches collapsed given as reference figures, so measure the stock rear shock before ordering. Both mounts are factory style, and the twin tube body uses a nylon banded piston head and 10 stage velocity sensitive valving.
Key features
- Rear position for older Dodge and Toyota trucks
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Maintaining older trucks
Older trucks often have rust in the shock mounts and frame brackets, which can slow a replacement or cause a loose fit. Clean the mounting points thoroughly, and replace any bushings or bolts that have corroded. Because the suspension on these trucks is often worn in other places, check the leaf springs, bushings and control arms before expecting a new shock to restore the original ride.
Lift ratings on older trucks matter because the suspension geometry was designed for stock height. Measure the stock rear shock and note its mount spacing before ordering. After installing, check the bolts again after the first drives, and inspect the shock body for seepage at the seal over the following weeks.
- Clean and inspect frame brackets for rust
- Replace corroded mount bolts
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 925506 |
| UPC | 614901072099 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | Vehicle specific (reference 25.74 in) |
| Collapsed length | Vehicle specific (reference 15.49 in) |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Lift range | 4 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1961 to 1971 Dodge D100, D200 and D300 pickups, the 1976 to 1993 Dodge Ramcharger, the 1961 to 1977 and 1986 to 1989 Dodge W100, the 1977 to 1993 Dodge W150, the 1961 to 1980 Dodge W200, the 1981 to 1993 Dodge W250, the 1967 to 1980 Dodge W300, the 1981 to 1993 Dodge W350, the 1987 to 1993 Mazda B2600, the 1976 to 1981 Plymouth Trailduster and the 1980 to 1985 Toyota Pickup.
Dodge trucks from the 1994 model year on, and Mazda and Toyota trucks outside these years, are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lengths vary by vehicle, measure the stock rear shock before you order. The 4 inch lift rating is the figure to check against your rear height.
What’s included
One rear shock, sold as each, with no boot.












