Select your vehicle
-13%

Pro Comp ES3000 Series Shock Absorber – 324501

Pro Comp Suspension

Shop GMC K1500 Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front shock for 1988–1999 Chevrolet and GMC K1500 pickups, 1995–1999 Chevrolet Tahoe and 1992–1999 GMC Yukon
  • Also fits 1988–1998 K2500 and K3500 pickups and 1992–1998 K2500 Suburbans
  • Part 324501, ES3000 Series, rated for a 6 in. lift
  • Factory upper and lower mounts, lengths vehicle specific
  • Hydraulic, non-adjustable, sold as each

Description

Overview

The Pro Comp Suspension ES3000 324501 is a front hydraulic shock absorber for many Chevrolet and GMC trucks and SUVs from the late 1980s and 1990s. It fits the Chevrolet and GMC K1500 pickups and Suburbans, the K2500 and K3500 pickups, the 1995–1999 Chevrolet Tahoe, the 1992–1999 GMC Yukon and several V-series Suburbans and trucks.

Pro Comp rates the shock for a 6 in. lift. Its upper and lower mounts are factory, and the extended, collapsed and travel lengths are set to each vehicle. Damping comes from a twin tube cellular gas body with 10-stage velocity-sensitive valving, and the piston rod is 5/8 inch chrome-hardened with a Teflon rebound stop. Pro Comp covers it with its limited lifetime warranty.

Key features

  • Twin tube cellular gas design
  • 10-stage velocity-sensitive valving
  • 5/8 inch chrome-hardened piston rod
  • Teflon rebound stop
  • Double welded shock mounts
  • Factory upper and lower mounts
  • Rated for a 6 in. lift
  • Pro Comp Suspension limited lifetime warranty

Lift and older trucks

Older Chevrolet and GMC trucks often have rubber bushings, worn mounts and tired springs that affect how a new shock performs. A new shock can only control movement as well as the rest of the suspension allows, so inspect the springs, bump stops and control arms when replacing a unit. Look for sagging springs and cracked bushings.

A lift changes the geometry of the suspension, and the shock’s length must suit the ride height. If the truck has been lifted, measure the old shock’s lengths and compare them with the new unit before fitting. Check that the shock does not bind at full droop or full compression, and reroute any brake or wiring lines it might contact.

  • Sagging springs or worn bump stops
  • Cracked or hardened bushings
  • Clearance at full compression and droop

Specifications

Brand Pro Comp Suspension
Part number 324501
UPC 614901041897
Shock series ES3000
Position Front
Type Hydraulic, twin tube cellular gas design
Extended, collapsed and travel lengths Vehicle specific
Upper mount Factory
Lower mount Factory
Lift height rating 6 in. lift
Adjustable No
Remote reservoir No
Finish White
Boot included No
Sold as Each

Vehicle fitment

It fits the 1992–1994 Chevrolet Blazer, the 1988–1998 Chevrolet K1500 pickups, the 1992–1999 Chevrolet K1500 Suburban, the 1992–1998 Chevrolet K2500 Suburban, the 1995–1999 Chevrolet Tahoe, the 1988 Chevrolet V20 Suburban, the 1989–1991 Chevrolet V2500 Suburban, the 1988–1999 GMC K1500 pickups, the 1988–1998 GMC K2500 and K3500 pickups, the 1992–1998 GMC K2500 Suburban, the 1988–1991 GMC V2500 Suburban and V3500, and the 1992–1999 GMC Yukon.

Chevrolet and GMC K-series trucks from 1999 and later, the 2000 and later Tahoe, and the 1991 and earlier Blazer are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

At a 6 in. lift rating, this shock suits trucks with about that much suspension height. Check your truck’s lift against that figure, and measure the shock being replaced, because the lengths vary by vehicle.

What’s included

One shock absorber, part 324501.

Not included: the dust boot.

SKU: EXP324501 Category:

Specification

Shipping weight 5.16 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Chevrolet Blazer1992–1994Base, Cheyenne, Silverado, Silverado Sport
Chevrolet K15001988–1998Base, Cheyenne, Scottsdale, Silverado, Sport, WT
Chevrolet K1500 Suburban1992–1999Base, LS, LT, Silverado
Chevrolet K2500 Suburban1992–1998Base, LS, LT, Silverado
Chevrolet Tahoe1995–1999Base, LS, LT
Chevrolet V20 Suburban1988Scottsdale, Silverado
Chevrolet V2500 Suburban1989–1991Scottsdale, Silverado
GMC K15001988–1999Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport
GMC K25001988–1998Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX
GMC K2500 Suburban1992–1998Base, SLE, SLT
GMC K35001988–1998Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX
GMC V2500 Suburban1988–1991Base, SLE, Sierra Classic
GMC V35001988–1991Base, High Sierra, SLE, Sierra Classic
GMC Yukon1992–1999Base, Denali, GT, SL, SLE, SLT, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Pro Comp ES3000 324501 fit a 1997 Chevrolet Tahoe?

Yes. The 1997 model year falls inside the 1995–1999 Chevrolet Tahoe range Pro Comp lists, which covers the Base, LS and LT versions. Confirm your vehicle's year, model and trim before ordering.

What lift is the 324501 rated for?

Pro Comp rates the 324501 for a 6 in. lift. It is a front shock with factory upper and lower mounts, and its lengths are vehicle specific, so compare the old and new units before ordering.

Is the 324501 adjustable?

No. It is a non-adjustable hydraulic shock finished in white, with 10-stage velocity-sensitive valving. The dust boot is not included.

Can I use this shock on a truck with a different lift?

Check the lift before buying. The unit is rated for a 6 in. lift, so a truck with a different lift needs its shock lengths compared with the old unit. A mismatched length can limit travel or bind the mounts.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop GMC K1500 Shock Absorbers on Amazon