Select your vehicle
-13%

Pro Comp ES3000 Series Shock Absorber – 320515

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES3000 Series shock, part 320515, white finish
  • Factory upper and lower mounts, rated for a 5 in. lift
  • Vehicle-specific extended, collapsed and travel lengths
  • Hydraulic, non-adjustable, sold as each

Description

Overview

The Pro Comp Suspension ES3000 320515 is a front hydraulic shock absorber rated for a 5 in. lift. It uses the factory upper and lower mounts, and its extended, collapsed and travel lengths are set to the vehicle. The shock is finished in white and sold as each.

The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving. Its 5/8 inch chrome-hardened piston rod and Teflon rebound stop are built for comfortable highway driving and for harder use, and the double welded mounts add strength. The shock carries the Pro Comp Suspension limited lifetime warranty.

Key features

  • Twin tube cellular gas design
  • 10-stage velocity-sensitive valving
  • 5/8 inch chrome-hardened piston rod
  • Teflon rebound stop
  • Double welded shock mounts
  • Factory upper and lower mounts
  • Rated for a 5 in. lift
  • Pro Comp Suspension limited lifetime warranty

Choosing the right setup

Matching a replacement shock to the truck comes down to lift height, mount type and length. A shock built for a raised suspension has different extended and collapsed lengths than one built for stock height, and if the length is wrong the suspension can sit at the wrong height or run out of travel early.

Factory mounts keep the shock at the original points, which simplifies the swap but still calls for a check of the old unit. Measure the removed shock end to end before buying, and inspect the mount bushings and bolts. If the truck has been modified elsewhere, the front geometry may have changed and is worth inspecting before a new shock goes in.

Replacing front shocks alongside a lift is common because the old units were set for the original height. Confirm the suspension height first, then match the shock to that height rather than to the body.

  • Measure the old shock extended and collapsed
  • Check factory mounts for wear
  • Confirm suspension height before buying
  • Replace shocks in pairs on the same axle

Specifications

Brand Pro Comp Suspension
Part number 320515
UPC 614901695649
Shock series ES3000
Position Front
Type Hydraulic, twin tube cellular gas design
Extended, collapsed and travel lengths Vehicle specific
Upper mount Factory
Lower mount Factory
Lift height rating 5 in. lift
Adjustable No
Remote reservoir No
Finish White
Boot included No
Sold as Each

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering, and check that the 5 in. lift rating suits your suspension height.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A 5 in. lift rating means the shock is designed for a suspension raised by that amount. Mismatched lift and shock length can leave the suspension at the wrong height or limit travel, so measure your current setup before ordering.

What’s included

One shock absorber, part 320515.

Not included: the dust boot.

SKU: EXP320515 Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

What lift is the Pro Comp ES3000 320515 rated for?

Pro Comp rates the 320515 for a 5 in. lift. The shock is a front position unit with factory upper and lower mounts, and its extended, collapsed and travel lengths are vehicle specific.

Is there a fitment list for the 320515?

Confirm fit for your truck's year, model and trim, then compare the 5 in. lift rating and the factory mounts with your current setup before ordering.

Is the 320515 adjustable?

No. It is a non-adjustable hydraulic shock finished in white. The dust boot is not included, and the shock has no remote reservoir. Pro Comp rates it for a 5 in. lift.

Should front shocks be replaced in pairs?

Yes, it is usually the better choice. Replacing both front shocks keeps damping even from side to side, which helps steering and tire wear. Check the other side's mounts and bushings while the job is open.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon