Overview
The Pro Comp Suspension ES3000 326506 is a rear hydraulic shock absorber for the 1986–1989 Toyota 4Runner in DLX and SR5 versions and the 1995–2004 Toyota Tacoma in Base, Limited, Pre Runner and SR5 versions. It is rated for a 4 in. lift.
The shock uses factory upper and lower mounts, and its lengths are vehicle specific. Its twin tube cellular gas body combines 10-stage velocity-sensitive valving with a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. It is suited to comfortable highway driving and demanding conditions, and it carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rear position, rated for a 4 in. lift
- Pro Comp Suspension limited lifetime warranty
Choosing a lift height
A shock controls how fast the spring moves, and lifting a truck changes the length and angle it works at. That is why a lift rating matters here. Measure your rear ride height before buying, then compare it with the rating on the shock and with the length of the unit you are removing.
Twin tube gas shocks handle repeated hard use better when they are mounted at the correct length. Changing tires, adding a longer control arm or fitting new springs can alter the stroke the shock uses, so recheck the mounts and clearance after any suspension change.
- Check the mounts for cracked bushings after the first trail runs
- Look for oil on the body or a shock that bangs over bumps
- Recheck clearance at full compression after a lift
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 326506 |
| UPC | 614901042474 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 4 in. lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1986–1989 Toyota 4Runner in DLX and SR5 versions and the 1995–2004 Toyota Tacoma in Base, Limited, Pre Runner and SR5 versions.
Toyota 4Runners from 1985 and earlier and from 1990 onward, and Tacomas from 1994 and earlier or from 2005 onward, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 4 in. lift rating means this shock is meant for a Toyota with that much suspension height. Compare the vehicle-specific lengths with the shock being replaced, and check that the factory mounts line up with your truck.
What’s included
One shock absorber, part 326506.
Not included: the dust boot.











