Select your vehicle

Pro Comp Pro Runner Monotube Shock Absorber – ZX2109

Pro Comp Suspension

Shop Ford F-150 Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp Pro Runner SS front shock, part number ZX2109
  • Designed for a 2 inch lift
  • Fits the 2009–2013 Ford F-150
  • Nitrogen gas charged, 2 inch body, rubber bushing included
  • Comes with a 90-day ride guarantee and a lifetime warranty

Description

Overview

The Pro Comp ZX2109 is a front Pro Runner SS monotube shock absorber for the 2009–2013 Ford F-150, designed for a 2 inch lift. It is sold as a direct fit replacement for the front position on that truck.

The monotube body is nitrogen gas pressurized, which keeps the oil under pressure so the shock resists cavitation during compression and rebound. The design dissipates heat more efficiently than a traditional twin tube hydraulic shock. The valving is multi-stage and tuned to the application, and the body is brushed and zinc plated with a clear coat.

The shock is tuned for ride quality and handling. In a monotube, the nitrogen sits behind a floating piston, so damping stays consistent over repeated compression, which matters on a truck used both on pavement and on trails.

The 2 inch lift is the design figure Pro Comp gives for this shock, so a truck lifted more or less than that should be measured before the shock is ordered. The 2 inch body and brushed zinc finish with clear coat are the physical details Pro Comp describes.

Key features

  • Front position, direct fit
  • Designed for a 2 inch lift
  • Nitrogen gas charged monotube
  • 2 inch diameter body with brushed zinc and clear coat finish
  • Rubber bushing and black polyurethane boots included

Trail use and front damping

Front shocks on a half-ton truck do much of the work when the front tires hit ruts, rocks and washboard. A monotube shock keeps the oil and gas under pressure, which helps damping stay steady during repeated hits. On a truck driven both on pavement and on trails, consistent damping makes the front feel more planned.

Front shocks wear faster when the truck is driven hard off road, because dirt and water can work into the boot and seal. Check the boots after each trip and wipe the shaft clean. Pairing new shocks with worn bushings or ball joints can leave the front end feeling loose, so inspect those parts when the shocks are changed.

  • Wipe the shaft after off-road trips
  • Inspect boots for splits
  • Check upper mounts for wear
  • Look over ball joints during the swap

Specifications

Brand Pro Comp Suspension
Part number ZX2109
UPC 614901099928
Shock series Pro Runner SS
Position Front
Lift height 2 in.
Body diameter 2 in
Charge Nitrogen, gas charged
Finish Brushed zinc, clear coat
Bushing Rubber, included
Boots Black polyurethane, included
Ride guarantee 90 days
Warranty Lifetime, transferable

Vehicle fitment

It is a direct fit for the 2009–2013 Ford F-150, in the front position at a 2 inch lift.

The 2004–2008 F-150 and the 2014 and later trucks are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One front Pro Runner SS monotube shock with rubber bushing and black polyurethane boots.

SKU: EXPZX2109 Category:

Specification

Shipping weight 11.00 lbs
Package dimensions 25.00 × 6.00 × 6.00 in
brands

Fitment

VehicleYearsTrims
Ford F-1502009–2013FX4, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the ZX2109 fit a 2009–2013 Ford F-150?

Yes. It fits the 2009–2013 Ford F-150 in the front position at a 2 inch lift. Confirm the year, model and trim match your truck, since other F-150 years are not covered.

What lift height is the ZX2109 designed for?

Pro Comp designs the ZX2109 for a 2 inch lift. Its body is 2 inches in diameter and nitrogen gas charged, and a rubber bushing and black polyurethane boots come with the shock.

What warranty comes with the ZX2109?

It carries a 90-day ride guarantee and a lifetime warranty that transfers to a new owner, and the terms apply to the shock as sold.

Can a front shock be upgraded without changing the springs?

Yes, a front shock can be replaced without changing the springs if the ride height and mount style match the truck. Check that the new shock suits the current spring and lift, and inspect the bushings and boots at the same time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford F-150 Shock Absorbers on Amazon