Overview
The Pro Comp Suspension ES3000 320595 is a hydraulic shock absorber from the ES3000 Series. Its extended, collapsed and travel lengths are vehicle specific, and it uses the factory upper and lower mounts. No make, model or year is named for this part. The shock is non-adjustable, has no remote reservoir and is finished in white.
The shock is a twin tube cellular gas design with 10-stage velocity-sensitive valving. Its 5/8 inch chrome-hardened piston rod and Teflon rebound stop are meant to suit both highway comfort and harder conditions, and double welded mounts add strength. The double welded mounts carry the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
- Pro Comp Suspension limited lifetime warranty
Things to check
A shock absorber is a wear part, and its job is to control spring movement rather than carry the vehicle’s weight. Good damping keeps tires on the road over washboard, while worn units let the body float or bounce. On a truck used for daily driving, periodic checks are a sensible part of maintenance.
Start with a visual check of the body and the piston rod. Oil streaks, dents or scoring on the rod suggest the seal has failed. Next, test the mounts for play and look for cracked rubber. These checks are quick and show whether the shock is still doing its job.
When replacing a shock, look at the rebound stop and bump stop at the same time, since they affect the same motion. Replacing one shock is possible, but matched units on the same axle give more even handling.
- Oil on the piston rod or body
- Play at the mounts
- Cracked bump stops
- Uneven tire wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 320595 |
| UPC | 614901320596 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the factory mount points and vehicle-specific lengths with the shock on your truck.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 320595.
Not included: the dust boot.










