Overview
The Pro Comp Suspension ES3000 323551 is a front hydraulic shock absorber for the 2003–2005 Dodge Ram 2500, in the Laramie, SLT and ST versions. It uses the factory upper and lower mounts, so it is set up to replace the original shock at the same points. Pro Comp rates it for 0 in. of lift or drop.
The construction pairs twin tube cellular gas with 10-stage velocity-sensitive valving. The 5/8 inch chrome-hardened piston rod and Teflon rebound stop are built into the unit, and it is designed for a comfortable highway ride with capable control on rough roads. Double welded mounts and the Pro Comp Suspension limited lifetime warranty complete the design.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rated for 0 in. lift or drop
- Pro Comp Suspension limited lifetime warranty
Front suspension wear
Front shocks control the wheel’s movement over bumps and help keep the tires in contact with the road. When they weaken, the front end can bounce, skip on uneven pavement and feel vague at highway speeds. The steering may also feel less settled when braking into a turn, since weight shifts quickly to the front.
Because front shocks work with the springs and steering linkage, inspect the ball joints, tie rod ends and bushings when replacing them. Tire balance and alignment also affect how the new shock performs. Check the mounting hardware to make sure the shock sits in the original position before the first drive.
- Front end bounce after bumps
- Uneven front tire wear
- Vague steering at highway speed
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 323551 |
| UPC | 614901323559 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 0 in. lift or drop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 2003–2005 Dodge Ram 2500 in the Laramie, SLT and ST versions.
Ram 2500 model years outside 2003 to 2005, the Ram 1500 and the Ram 3500 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is rated for 0 in. lift or drop, so confirm the ride height on your Ram before fitting. The factory mounts keep the shock at the original points, so the new unit should line up with the old one.
What’s included
One shock absorber, part 323551.
Not included: the dust boot.












