Overview
The Pro Comp Suspension ES3000 320509 is a hydraulic shock absorber from the ES3000 Series. Its extended, collapsed and travel lengths are set to the vehicle it is sold for, and it uses the factory upper and lower mounts. No make, model or year is named for this part number.
The ES3000 is a twin tube cellular gas design that improves driving comfort on the road and off it. Its 10-stage velocity-sensitive valving changes with road conditions. The 5/8 inch chrome-hardened piston rod and Teflon rebound stop are built for demanding use, and double welded mounts add strength. The shock carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
- Pro Comp Suspension limited lifetime warranty
Factory mount replacements
Factory mounts keep the shock in its original geometry, which is useful when the replacement must match the stock suspension closely. Keeping the original geometry also helps the suspension behave as the vehicle was designed. Because the lengths are vehicle specific, a careful comparison with the old unit is the simplest way to avoid a poor fit. Measure the extended and collapsed lengths and the distance between the mount centers before ordering.
Look at the bushings and hardware before fitting the new shock. Cracked rubber and corroded bolts can change how the shock sits and can cause clunking. Use the correct torque and check the shock at full lock and full travel once it is installed, so nothing rubs or binds.
- Compare bolt sizes and washers
- Replace seized mount hardware
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 320509 |
| UPC | 614901041132 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. The factory mounts and vehicle-specific lengths are the points to match against your current shock.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 320509.
Not included: the dust boot.












