Overview
The Pro Comp Pro Runner Monotube ZX2083 is a rear shock absorber for vehicles with 0 to 2 inches of lift. It fits the 2007-2009 Toyota FJ Cruiser, including the Base, TRD Special Edition and Trail Teams Special Edition trims, and it is designed for late model trucks, Jeeps and SUVs.
The gas charged monotube design is a step up from traditional twin tube, hydraulic shocks. The multi-stage valving is tuned for each application through dyno and real-world testing, which helps optimize ride quality and handling.
The body is a brushed, zinc plated and clear coated monotube with a 2-inch diameter, charged with nitrogen gas. The nitrogen helps prevent cavitation during compression and rebound, which helps the shock dissipate heat and reduces shock fade. The shock includes a rubber bushing and black polyurethane shock boots.
In a monotube shock, one pressure tube holds both the oil and the gas, separated by a piston, instead of using a second reserve tube as a twin tube design does. The ZX2083 is built on that layout and is rated for rear use only.
Key features
- Monotube design, gas charged with nitrogen
- Multi-stage valving tuned to the application
- 2-inch diameter body
- Brushed, zinc plated and clear coated finish
- Rubber bushing and black polyurethane shock boots included
- Rear position for 0 to 2 inches of lift
Lift range and shock choice
Shock choice follows the lift on the truck. Stock height and small lifts put less extension on the shock than a larger lift, so the damper and valving need to suit the actual suspension geometry. A rear shock sized for a small lift can run out of extension on a larger setup and bottom out sooner.
Monotube shocks separate the oil and gas inside one body, which tends to keep damping consistent as the shock heats up on rough ground. That matters on a body-on-frame vehicle that spends time on uneven trails. Check the bushings and shock boots on the existing shock first, since a worn bushing can make a new shock feel loose.
When replacing rear shocks, look for oil seepage, a knocking sound over bumps, or the rear end bouncing after a dip. Replacing the pair together keeps the ride even side to side. Check bump stops and springs at the same time, because a worn spring or stop changes how the shock loads.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2083 |
| UPC | 614901094886 |
| Shock series | Pro Runner |
| Shock type | Monotube, gas charged |
| Charge | Nitrogen gas |
| Position | Rear |
| Lift range | 0 to 2 inches |
| Body diameter | 2 inches |
| Finish | Brushed, zinc plated, clear coated |
| Valving | Multi-stage, vehicle specific |
| Included | Rubber bushing and black polyurethane shock boots |
| Warranty | True lifetime warranty, 100% transferable, plus a 90-day ride guarantee |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007-2009 Toyota FJ Cruiser, including the Base, TRD Special Edition and Trail Teams Special Edition trims.
The list covers only the 2007-2009 FJ Cruiser, so later FJ Cruiser model years and other Toyota models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear shock, with a rubber bushing and black polyurethane shock boots included.


























