Overview
The Pro Comp 929546 is an ES9000 twin tube shock that Pro Comp describes as its nitrogen gas charged shock for heavy loads and demanding driving. It uses 10-stage velocity sensitive valving and a white finish.
The shock is sold as each, with a fixed body and factory upper and lower mounts. Its length is 29.83 inches extended, 17.32 inches collapsed and 12.51 inches of travel.
Key features
- Twin tube design
- 10-stage velocity sensitive valving
- 1 3/8-inch nylon banded full displacement piston head
- Double welded shock mounts for strength
- Nitrogen gas charged
Heavy loads and shock stress
Shocks working under heavy loads spend more time compressed and absorb larger impacts, so the piston, seals and mounts are under more strain than on a lightly loaded truck. A shock with a banded piston and welded mounts is built with that work in mind. The springs and bushings should still be inspected, because a worn spring can make a good shock wear faster.
Care is simple. Keep the shock body clean, look for oil on the outer tube, and check the mounting bolts after the first few tows or hauling trips. Listen for knocks at the ends, which usually point to worn bushings or loose hardware. A shock that feels soft, bounces after bumps, or has lost height on one side is often ready for replacement.
- Inspect the outer tube for oil
- Check mounts after heavy loads
- Replace worn bushings along with the shock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 929546 |
| UPC | 614901929546 |
| Series | ES9000 |
| Extended length | 29.83 inches |
| Collapsed length | 17.32 inches |
| Travel | 12.51 inches |
| Mounts | Factory upper and lower |
| Adjustable | No |
| Finish | White |
The 929546 is one of several ES9000 shocks with the same valving but different lengths. Its 29.83 inch extended length and 17.32 inch collapsed length set the stroke it can use, and the 12.51 inch travel is the distance it moves between those two lengths. Factory upper and lower mounts mean the shock is meant to bolt into the original mounting points without new brackets, which is the reason to check the old shock’s measurements before ordering.
The nylon banded piston head and double welded mounts are designed for heavy-duty work with loads, where the shock sees the most stress.
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the length and mounts with the original shock.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock. No boot or remote reservoir is included.









