Overview
The ES3000 shock absorber, part number 332030, is a factory-mount design with vehicle-specific lengths. Fit depends on the truck it goes on, so check it against the shock you are removing.
The shock is a twin-tube design with a gas charge. Its 10-stage velocity-sensitive valving handles movement at different speeds, and the Teflon rebound stop limits how far the shock can extend on the return stroke.
Key features
- 10-stage velocity-sensitive valving.
- A Teflon rebound stop.
- A chrome-hardened 5/8 inch piston rod.
- Double-welded shock mounts.
- Limited lifetime warranty from Pro Comp Suspension.
Fit checks before installation
Factory mounts keep the shock in its original place, so the question is usually whether the length and the rest of the suspension work together. Measure the old shock with the truck supported, noting its extended and collapsed lengths and the mount centers. Then check the new shock’s travel against the suspension’s own travel to make sure it does not bind at either end.
Clearance matters too. A longer shock can hit a frame crossmember at full compression, while a shorter one can pull on the mounts at full droop. Cycle the suspension by hand after installation and watch the body of the shock, the rod and the mounts for contact. A little rubbing at the start suggests a fit problem worth fixing before driving.
- Measure the old shock first
- Check clearance at full compression
- Cycle the suspension by hand
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 332030 |
| UPC | 614901043037 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Fit depends on the vehicle. Compare the mount positions and lengths with the original shock before ordering.
Lengths are vehicle specific, so compare the new shock with the old one before installation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory mounts keep the shock in its original position, so the main check is clearance. Cycle the suspension by hand after installation to make sure the shock does not hit anything.
What’s included
One ES3000 shock absorber.
Not included: a dust boot, since none is listed with the shock.












