Overview
The Pro Comp Pro Runner ZX2048 is a rear gas-charged monotube shock absorber for a 3 inch lift. It fits the 2004 to 2013 Nissan Titan and has loop-style upper and lower mounts. It measures 27.37 inches extended, 17.42 inches collapsed and 9.95 inches of travel.
The Pro Runner monotube is tuned for each application with multi-stage valving developed through dyno and real-world testing. The brushed, zinc plated, clear coated body is nitrogen charged to limit cavitation, which helps the body move heat away.
The Titan is listed in several trims, including the LE, PRO-4X, S, SE, SL, SV and XE, so the same shock covers each of them within the 2004 to 2013 range.
The 9.95 in. of travel is the difference between the 27.37 in. extended and 17.42 in. collapsed figures. Those are the measurements to compare with the shock being replaced, and the 3 inch lift and loop mounts should match the truck before fitting.
Key features
- Rear placement for a 3 inch lift
- Loop upper and lower mounts
- Multi-stage valving
- Nitrogen gas charge with a zinc finish
- Boot included
Working with a lift
A rear shock has to cover the range between the lift’s extended and collapsed positions, so a change in lift often means a change in the shock. Before fitting, check that the new unit’s lengths and travel suit the lift in use, and confirm there is clearance at full compression. Loop-mounted shocks need brackets that accept an eye at each end.
Many owners inspect the bump stops and springs when they replace a rear shock, since these parts share the load. Look for worn bushings in the loop eyes and cracks in the mounting brackets. A fresh shock on worn hardware will not hold its damping as designed.
- Confirm clearance at full compression
- Check loop eyes and bushings
- Inspect bump stops and springs
- Recheck hardware after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2048 |
| UPC | 614901024517 |
| Shock series | Pro Runner |
| Position | Rear |
| Lift height | 3 in. |
| Extended length | 27.37 in. |
| Collapsed length | 17.42 in. |
| Travel | 9.95 in. |
| Upper and lower mounts | Loop |
| Adjustable | No |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
It fits the 2004 to 2013 Nissan Titan, including the LE, PRO-4X, S, SE, SL, SV and XE models.
Nissan Titan years outside 2004–2013, and other Nissan models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 3 inch lift on your Titan, and check the loop mounts against the existing rear shock before fitting.
What’s included
One rear monotube shock, with its boot.





























