Overview
The Pro Comp 315517 is a front ES3000 twin tube cellular gas shock for a 0 to 2 inch lift. It fits the 1975 to 1993 Dodge Ramcharger and the 1975 to 1981 Plymouth Trailduster.
The shock is 15.69 inches extended and 10.02 inches collapsed, with 5.67 inches of travel. It uses a stem upper mount and a loop lower mount.
Key features
- Front position for a 0 to 2 inch lift
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- Stem upper and loop lower mounts
Choosing a replacement shock
Front shocks on older trucks take repeated hits from washboard roads and from the suspension cycling over uneven ground, so the mounts and bushings often wear before the damper body does. Start by matching the mounting style. A stem upper and loop lower arrangement has to line up with the original points on the truck, and a mismatch can bind the suspension or limit the stroke.
Twin tube gas shocks hold their damping more consistently over repeated hits than many simple single tube units, but that only helps if the mounting is sound. Replace worn bushings and check the lower mount hardware at the same time, because a loose connection makes even a new shock feel vague on the road.
Look over the old shock for oil on the body, a dented tube, or pitting on the rod before deciding it can stay in service. Uneven tire wear and a body that keeps bouncing after a bump are common signs the damper has lost control.
- Confirm the mount style before buying
- Replace worn bushings during the install
- Inspect the old rod for pitting and leaks
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 315517 |
| Series | ES3000 |
| Position | Front |
| Lift | 0 to 2 inches |
| Extended length | 15.69 inches |
| Collapsed length | 10.02 inches |
| Travel | 5.67 inches |
| Upper mount | Stem |
| Lower mount | Loop |
The 315517 is a front shock for a 0 to 2 inch lift, and its 15.69 inch extended length and 10.02 inch collapsed length give 5.67 inches of travel. The stem upper mount and loop lower mount set how the shock connects to the Ramcharger and Trailduster, and the twin tube cellular gas design with 10-stage velocity sensitive valving controls the damping. The 5/8 inch chrome hardened piston rod and Teflon rebound stop complete the shock’s main structure.
Both trucks on the list are from the 1970s and early 1980s, so the year and trim should be checked before ordering, and the mounts should be inspected for wear.
Vehicle fitment
It fits the 1975 to 1993 Dodge Ramcharger (Base, Canyon Sport, Royal SE and SE) and the 1975 to 1981 Plymouth Trailduster (Base). Dodge Ram trucks fall outside this fitment. Confirm your vehicle’s year, model and trim before ordering.
The list covers these two models only, not the Dodge Ram trucks. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front ES3000 shock.










