Overview
The Pro Comp Pro Runner ZX2041 is a gas-charged monotube shock absorber with loop-style upper and lower mounts. It measures 26.76 inches extended, 17.04 inches collapsed and 9.72 inches of travel, and it is not adjustable. Confirm the position and fit for your vehicle before ordering.
The Pro Runner monotube is designed to pair with Pro Runner control arms. Its ride tuning and multi-stage valving were developed through dyno and real-world testing. The brushed, zinc plated, clear coated body is nitrogen gas pressurized to limit cavitation during compression and rebound.
Monotube shocks keep the piston and gas in one tube. This shock uses that layout, so the gas charge and damping stay within a single body.
The shock is not adjustable, so its damping is set by the valving built into the unit. The extended length of 26.76 in. and collapsed length of 17.04 in. are the figures to compare with the shock being replaced, and the position is the first detail to confirm.
Key features
- Monotube body with a nitrogen gas charge
- Multi-stage valving tuned to the application
- Loop upper and lower mounts
- Zinc plated, clear coated finish
- Boot included
Setting up a monotube shock
A gas-charged monotube shock can feel firmer when cold and settle after a few drives, which is normal for this design. Because it is not adjustable, its damping depends on the valving built into the unit, so the right choice comes down to matching travel and mounts to the vehicle rather than tuning clicks at the shock.
Routine care is simple: keep the boot intact, wipe grit from the shaft, and look for oil or dents on the body. Loop eyes at both ends should move freely without rubbing or play. Recheck the mounting hardware after the first few drives, since new shocks can settle into their brackets.
- Expect a firmer feel when cold
- Keep the boot intact and clean
- Check loop eyes for rubbing or play
- Recheck hardware after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2041 |
| UPC | 614901024449 |
| Shock series | Pro Runner |
| Extended length | 26.76 in. |
| Collapsed length | 17.04 in. |
| Travel | 9.72 in. |
| Upper and lower mounts | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
Confirm the position and fit for your vehicle’s year, model and trim before ordering.
Installation notes
Confirm front or rear placement before fitting, and compare the 26.76 in. extended length with the shock being replaced.
What’s included
One zinc-finished monotube shock, with its boot.






























