Overview
The Pro Comp Pro Runner part ZX2018 is a front gas-charged monotube shock absorber for a lift of 0 to 2.5 inches. It has a stem-style upper mount and a loop-style lower mount, and it measures 16.61 inches extended, 11.65 inches collapsed and 4.96 inches of travel.
The Pro Runner line is tuned for late-model trucks, Jeeps and SUVs, using multi-stage valving developed through dyno and real-world testing. The nitrogen charge is designed to limit cavitation, and the zinc plated, clear coated monotube body dissipates heat efficiently, which reduces shock fade.
The extended figure of 16.61 in. and the collapsed figure of 11.65 in. are the two measurements to compare with the shock being replaced. The 4.96 in. of travel is the difference between them.
Key features
- Front placement for a 0 to 2.5 inch lift
- Stem upper mount and loop lower mount
- Multi-stage valving
- Nitrogen charged with a zinc plated finish
- Boot included
Reading length and lift together
Lift range and shock length are linked. A shock designed for a given lift has an extended length that matches the suspension height it was built for. Comparing the extended and collapsed figures with the old unit shows whether the replacement will reach the same extension and compression, which matters most on trucks that run with heavier loads or articulate on trails.
Short-travel shocks can bottom out on large bumps, while overlong units can strain the mounts. Before fitting, measure the current height at the front axle and compare it with the lift range on the part. Inspect the mounts and bushings at the same time so the new shock is not working against worn hardware.
- Measure current front height before fitting
- Compare extended and collapsed lengths with the old unit
- Inspect mounts and bushings during installation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2018 |
| UPC | 614901024203 |
| Shock series | Pro Runner |
| Position | Front |
| Lift height | 0 to 2.5 in. |
| Extended length | 16.61 in. |
| Collapsed length | 11.65 in. |
| Travel | 4.96 in. |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
It fits the 1999–2006 Chevrolet Silverado 1500 and the 2007 Silverado 1500 Classic, the 2001–2003 and 2005–2006 Silverado 1500 HD and its 2007 Classic HD variant, and the 1999–2006 GMC Sierra 1500, the 2007 Sierra 1500 Classic, the 2001–2003 and 2005–2006 Sierra 1500 HD, and the 2007 Sierra 1500 HD Classic.
Chevrolet and GMC 2500 and 3500 trucks, and years outside those listed, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With 4.96 in. of travel, check the extended and collapsed lengths against the shock being replaced before fitting.
What’s included
One front monotube shock, with its boot.




























