Overview
The Pro Comp Pro Runner part ZX2009 is a front gas-charged monotube shock absorber designed for a vehicle with a 6 inch lift. It has a stem-style upper mount and a loop-style lower mount, and it fits the 2003 to 2010 and 2011 to 2012 Dodge Ram 2500.
The shock is not adjustable and measures 30.33 inches extended, 19.57 inches collapsed and 10.76 inches of travel. The Pro Runner line uses vehicle-specific ride tuning, with multi-stage valving developed through dyno and real-world testing. The nitrogen-charged body helps reduce cavitation and shock fade.
In a monotube shock, the piston and a floating piston divide a single tube, and the nitrogen charge sits behind the floating piston under pressure. That pressure helps prevent cavitation during compression and rebound. Shock fade is the loss of damping that builds up when a shock overheats on long descents or rough trails, and the monotube body sheds heat more efficiently.
Key features
- Front position for a 6 inch lift
- Stem upper mount and loop lower mount
- Monotube body, nitrogen charged
- Multi-stage valving
- Zinc plated finish and boot included
Front shocks on a lifted truck
On a lifted truck the front shocks work at a different angle than stock, so the mounts and bushings carry more side load. A front shock that is worn can allow the axle to hop over washboard, pull under braking, or wander at highway speed. Because the lift changes the geometry, the shock should be matched to the height rather than chosen only by its body size.
Front shock wear often shows up as fluid on the body, a rocking feel after bumps, or uneven tire wear across the tread. Replacing both fronts at the same time keeps damping even from side to side. While the old unit is off, check the upper and lower bushings, the bump stop and the steering components that the shock works alongside.
- Look for oil seepage around the shock body
- Check bushings for cracking before fitting
- Keep the stock bump stop in good condition
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2009 |
| UPC | 614901024081 |
| Shock series | Pro Runner |
| Position | Front |
| Lift height | 6 in. |
| Extended length | 30.33 in. |
| Collapsed length | 19.57 in. |
| Travel | 10.76 in. |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Finish | Zinc plated |
| Boot included | Yes |
Vehicle fitment
It fits the 2003–2010 Dodge Ram 2500 and the 2011–2012 Ram 2500.
Ram 2500 years outside 2003–2012, and Ram 1500 and 3500 models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this shock is designed for a 6 inch lift, confirm your truck’s lift height and the stem upper and loop lower mount pattern before fitting.
What’s included
One front monotube shock, with a boot.


























