Select your vehicle

Bilstein 46mm Monotube Shock Absorber – 24-018685

Bilstein

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Bilstein B6 Series monotube shock, part 24-018685
  • Gas-charged monotube design
  • Confirm the vehicle application before ordering
  • Confirm length and mounting before ordering

Description

Overview

The Bilstein 24-018685 is a monotube, gas-charged shock from the B6 Series, designed for trucks, vans and SUVs. Because fit depends on the specific vehicle, confirm the application by matching length and mounting before ordering.

Monotube shocks use one pressure tube with a divider piston that keeps the damping oil separate from a gas charge. The gas keeps the oil from aerating as it heats, so the damping stays more consistent on long drives. Bilstein describes its shocks of this type as the least expensive and most effective way to extend the service life of a vehicle’s ride, and the design is meant to hold a vehicle’s control over every road surface it meets.

Shocks are sized for a particular vehicle, so the length, mounting style and stroke have to match the application. Compare the collapsed and extended dimensions with the shock you are replacing before you buy, because a shock that is too long or too short will not seat correctly at both ends.

Key features

  • Monotube construction with a gas-charged body
  • Velocity-sensitive digressive piston described by the maker
  • B6 Series shock type

Matching length and mounting

Length and mounting are the two measurements that decide whether a shock seats correctly. A shock that is too long can bind at full extension, and one that is too short can run out of travel and bottom out over bumps. Measure the old unit, collapsed and extended, with the suspension at rest, and note the eye or stud style at each end.

Monotube construction handles heat well, but it does not change the need for correct sizing. Use the old shock as a reference, and check the vehicle’s suspension height and any lift before ordering. Keep the old unit until the new one is confirmed to match.

  • Measure the old shock collapsed and extended
  • Note the upper and lower mount styles
  • Check for lift or leveling equipment on the vehicle
  • Keep the old shock until the new one is confirmed

Specifications

Brand Bilstein
Part number 24-018685
Shock series B6 Series
Shock type Monotube, gas-charged
Fitment type Universal fit (listed), no vehicles named

Vehicle fitment

Shocks in this series are sized for specific vehicles, so do not assume fit from the series name alone. Confirm the application, length and mounting for your vehicle before ordering.

Compare the collapsed and extended lengths with your current shock, and confirm the mounting style at both ends. Confirm your vehicle’s year, model and trim before ordering.

Questions & Answers

Which vehicles does the Bilstein 24-018685 fit?

Fit depends on the specific vehicle. Confirm the application for your year, model and trim, and compare the collapsed and extended lengths and mounting style with the shock you are replacing before ordering.

Is this shock a monotube design?

Yes. It is a monotube, gas-charged shock from the B6 Series. The gas charge and divider piston keep the damping oil from foaming as it heats.

Can this shock be used as a universal replacement?

No. Shocks are sized for a specific vehicle, so this one should be matched by length, mounting and application rather than used as a universal part.

What should I measure before buying a replacement shock?

Measure the collapsed and extended length, the eye or stud style at each end, and the stroke if you can. Compare these with the shock you are removing, and note any lift that changes ride height. Match the vehicle's year, model and trim before buying.

Does a monotube shock need different care than a twin-tube?

Care is largely the same. Inspect for oil leaks, worn bushings and torn boots, and replace the pair when one unit fails. Keep mounting hardware torqued, and clean dirt from the shaft to protect the seal.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon