Overview
The Pro Comp exhaust spacer kit, part number EXP55746B, is a pair of exhaust spacers for the 2007–2018 Jeep Wrangler (JK) with the 3.6-liter six-cylinder engine. The spacers are used on 2012 and later JKs with a suspension lift of 3 inches or more.
The spacers install between the driver and passenger side head pipe flanges and the flanges of the exhaust cross pipe. They move the cross pipe rearward, which keeps the front driveshaft from contacting the cross pipe when the suspension travels down.
Key features
- Driver and passenger side spacers
- Moves the exhaust cross pipe rearward
- Prevents driveshaft contact during suspension down travel
- Includes all necessary hardware
- For two-door and four-door Wrangler JK models
Driveshaft and exhaust clearance
When the suspension is lifted, the front driveshaft drops lower relative to the exhaust, and at full droop it can strike the cross pipe. Spacers move the cross pipe rearward to create room. Clearance is the whole point of the part, so the check after installation matters as much as the bolt-up itself.
Exhaust hangers and the heat shields around the pipe can also shift after a change in height. Inspect the hangers for stretch or cracks, and confirm the pipe does not rest against the frame. Recheck the gap after the first drives, since hardware can settle as it seats.
- Check the gap at full suspension droop
- Look for rub marks on the cross pipe
- Inspect exhaust hangers for stretch or cracks
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP55746B |
| Lift required | 3 inches or more |
| Engine | 3.6-liter six-cylinder |
| Body | Two-door and four-door |
| Included | Driver and passenger side spacers, all necessary hardware |
| Fitment type | Direct fit |
Vehicle fitment
The kit is for the 2007–2018 Jeep Wrangler (JK). It is used on the 2012–2018 Wrangler JK with 3 inches or more of lift, which is the application where the spacers are needed.
Wrangler JL models and older Wrangler generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the spacers between the head pipe flanges and the cross pipe flanges. After installation, check the clearance between the front driveshaft and the cross pipe through the full range of suspension travel.
What’s included
Driver and passenger side exhaust spacers and all necessary hardware.








