Overview
The Pro Comp RAPZ roll bar cover, part number 12501, wraps a 3 inch roll bar or square tubing. It comes in black or blue and covers roll bar padding for a cleaner look while protecting the paint underneath.
The cover is cut to length and wrapped around the bar, and installation is quick. The UPC for this part is 614901090017.
Key features
- Covers 3 inch roll bar or square tubing
- Available in black or blue
- Cut to length for the bar
- Protects roll bar paint and padding
Caring for Roll Bar Padding
Roll bar padding is there to cushion a body or head if the vehicle contacts the bar, so its condition matters. Padding that is torn, flattened, cracked or stiff from sun exposure loses its ability to absorb impact. Inspect it after hard trail use, rollovers or any moment the bar takes a hit.
A cover like the RAPZ sits over that padding and protects it from abrasion and sun. Wrap it smoothly so the seams do not catch on clothing or gear. Remove it to inspect the bar for dents, cracks at welds and rust, then rewrap once the bar is sound.
- Check welds and mounting points for cracks
- Replace padding that has lost its firmness
- Clean the bar before rewrapping to help the cover stick
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 12501 |
| UPC | 614901090017 |
| Covers | 3 inch bar or square tubing |
| Colors | Black or blue |
Vehicle fitment
This cover fits any 3 inch roll bar or square tubing, so it is not tied to a vehicle. Measure the bar diameter before ordering to make sure it matches the 3 inch size.
Installation notes
Cut the cover to the length of each bar section, then wrap it tightly so the edges meet. Once cut to length, the wrap goes on quickly.
What’s included
The kit is the cover only, with no fasteners or other hardware.









