Select your vehicle

Rugged Ridge Exhaust Spacer Kit – 17606.76

Rugged Ridge

$41.99Usually ships within 2 to 3 days
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 3:10 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2012–2018 Jeep Wrangler JK (2-door and Unlimited 4-door)
  • Moves the Y-pipe back to protect the front driveshaft on lifted Jeeps
  • Increases front suspension travel from 2.5 to over 5.5
  • Hardware included; part number 17606.76

Description

Overview

The Rugged Ridge Exhaust Spacer Kit, part number 17606.76, is an exhaust spacer kit for the 3.6L 6 cylinder Jeep Wrangler JK, in 2-door and 4-door models. It moves the front Y-pipe further back, which increases front suspension travel and helps protect the driveshaft on lifted Jeeps.

Jeep moved the exhaust forward on the 2012 Wrangler. On Jeeps with 2.5 or more inches of lift, the front driveshaft can contact the Y-pipe, which can melt the CV boot and cause early driveshaft failure. The spacers move the Y-pipe back for clearance and raise front suspension travel from 2.5 to over 5.5.

Key features

  • Moves the Y-pipe further back to protect the front driveshaft
  • Increases front suspension travel from 2.5 to over 5.5
  • Spacers install on the flanges between the front headers and the Y-pipe
  • Installs without permanent modification to the exhaust
  • Hardware included
  • Backed by Rugged Ridge’s exclusive three-year limited warranty

Driveshaft and lift clearance

Lift changes the driveline angles and moves the driveshaft closer to the exhaust at full suspension droop. Spacers that move the Y-pipe rearward add clearance without changing the exhaust routing. Clearance matters most on lifted Wranglers with larger tires, since the driveshaft travels further as the suspension articulates.

The front CV boot is the part most often damaged by contact heat, so check it during regular service and after off-road trips. Torn boots, grease on the drive components and rubbing marks on the exhaust are early signs of trouble. Replace any damaged boot before the joint fails, and keep the track bar and steering components in good condition as well.

  • Inspect the CV boot for tears
  • Look for rubbing marks on the exhaust
  • Check U-joint play
  • Recheck flange hardware after the first drives

Specifications

Brand Rugged Ridge
Part number 17606.76
Engine 3.6L 6 cylinder
Lift requirement 2 inches or more
Hardware Included
Warranty Three-year limited warranty

Vehicle fitment

It fits the 2012–2018 Jeep Wrangler (JK) in 2-door trims (75th Anniversary, Rubicon, Sahara, Sport and Sport S) and Unlimited 4-door trims (75th Anniversary, Rubicon, Sahara, Sport and Sport S).

Wrangler generations other than the JK, including the TJ, LJ and JL, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The spacers mount on the flanges between the front headers and the Y-pipe, and the exhaust does not need permanent modification. Mounting hardware is included. Let the headers and Y-pipe cool before working on them.

What’s included

Hardware is included with the kit. Confirm the spacer count and hardware against the package before installing.

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2012–201875th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Rugged Ridge 17606.76 fit a 2012 Jeep Wrangler JK?

Yes. It fits 2012–2018 Jeep Wrangler (JK) models in 2-door and Unlimited 4-door trims. It is made for the 3.6L 6 cylinder engine, so confirm the engine before installing.

Does the kit only work on lifted Jeeps?

The intended use is Jeeps with 2 inches or more of lift. On Jeeps with 2.5 or more inches of lift, the driveshaft can contact the Y-pipe, so the spacers protect the driveshaft on lifted Wranglers.

Does installation require cutting the exhaust?

No. The spacers do not require permanent modification to the exhaust. They install on the flanges between the front headers and the Y-pipe, and mounting hardware is included.

How often should the CV boot be checked after installing spacers?

Check it during regular service and after off-road trips. Look for cracks, grease leaks and torn edges. Catching a damaged boot early helps protect the driveshaft and axle joint.

Should the spacer hardware be rechecked after installation?

Yes. Recheck the mounting hardware after the first few drives, since the flanges can settle. Retighten as needed and inspect each joint for exhaust leaks.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon