Overview
The Pro Comp Suspension ES3000 321573 is a rear hydraulic shock absorber for Land Rover models. It fits the 1993 Land Rover Defender 110, the 1994–1995 and 1997 Land Rover Defender 90, the 1994–1999 Land Rover Discovery, the 2000 Land Rover Discovery Series II, the 1970–1974 and 1987–1994 Range Rover and the 1993 Range Rover Sport.
The shock is rated for 0 to 1 in. of lift and uses factory upper and lower mounts. Its lengths are vehicle specific. It is a twin tube cellular gas design with 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. Double welded mounts are fitted, and the Pro Comp Suspension limited lifetime warranty applies.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Rear position, rated for 0 to 1 in. of lift
- Pro Comp Suspension limited lifetime warranty
Choosing a rear shock
A rear shock controls how the axle moves over bumps and under braking, so it has a direct effect on ride, body control and tire contact. Off road, a shock that has lost damping lets the axle bounce and can cause the tires to skip over rough ground. On pavement the same wear shows up as wallowing after a dip or a float through corners. Rear shocks often wear at similar rates on both sides, so inspect the pair together.
When comparing shocks, start with lift and load. A shock is designed around a suspension height, and a higher lift extends its working range. Match the mount style, eye-to-eye length and stroke to the old unit, and check whether the bump stops and springs were replaced at the same time. Bushings and mounting bolts should be inspected before the new shock goes in.
- Measure the old shock eye to eye before ordering
- Look for oil residue on the shock body
- Inspect bushings and mounting hardware
- Check bump stops for cracking
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 321573 |
| UPC | 614901695694 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Lift height rating | 0 to 1 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1993 Land Rover Defender 110 (Base), the 1994–1995 and 1997 Land Rover Defender 90 (Base and LE), the 1994–1999 Land Rover Discovery (50th Anniversary Edition, Base, LE, LSE, SD, SE, SE7 and XD), the 2000 Land Rover Discovery Series II, the 1970–1974 and 1987–1994 Land Rover Range Rover (40th Anniversary Edition, Base, County, County LWB, County SE, Great Divide, Hunter and LSE) and the 1993 Land Rover Range Rover Sport.
Defender models from 1996 and from 1998 onward, the 2001 and later Discovery, and Range Rover models from 1975 to 1986 and from 1995 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear position uses the same 0 to 1 in. lift rating as the front shock. Keep the factory mounts in mind, and compare the vehicle-specific lengths against the rear shock being removed.
What’s included
One shock absorber, part 321573.
Not included: the dust boot.










