Overview
The Pro Comp 926507 is a rear ES9000 Series gas charged shock absorber for the 2000 to 2005 Ford Excursion, sold individually. It fits the Eddie Bauer, Limited, XLS and XLT versions.
The reference length is 27.07 inches extended and 15.94 inches collapsed. Pro Comp rates it for 0 inches of lift or drop, so it is a stock-height replacement. Both mounts are factory style, and the twin tube body uses a nylon banded piston head, double welded mounts and 10 stage velocity sensitive valving.
Key features
- Rear position for the Ford Excursion
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Stock-height rear shocks
A stock-height shock is built to match the original ride height of the vehicle, so it keeps the rear suspension at its factory geometry. This matters on a large SUV like the Excursion, where the rear springs and axle angles are designed around a particular height. Replacing a shock with one of the wrong height can change how the rear sits and how the tires wear.
Rear shocks on heavy vehicles work hard under load, and their damping often fades before the springs show wear. Signs of a tired shock include a bouncy rear end after bumps, fluid on the body and uneven rear tire wear. Keeping the rear bushings, springs and bump stops in good order helps a new shock perform as intended.
- Keep the rear height close to stock
- Check the springs for sag
- Inspect the bump stops
- Look for fluid on the shock body
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 926507 |
| UPC | 614901926507 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | Vehicle specific (reference 27.07 in) |
| Collapsed length | Vehicle specific (reference 15.94 in) |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 in, lift or drop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It is a rear fit for the 2000 to 2005 Ford Excursion in Eddie Bauer, Limited, XLS and XLT versions.
Excursion models from other years are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lengths are vehicle specific, so measure the stock rear shock on your Excursion before ordering. The 0 inch lift rating means this shock is for stock-height suspension.
What’s included
One rear shock, sold as each, without a boot.












