Overview
The Pro Comp ES9000 924573 is a white rear shock absorber for Land Rover Defender, Discovery and Range Rover models. It is a gas-charged twin-tube design with 10-stage velocity-sensitive valving, built for highway comfort and off-road control. It fits applications with a 3 inch lift.
The shock has a 1 3/8 inch nylon-banded, full displacement piston head and double welded shock mounts. Both the upper and lower mounts are factory style. It is sold as each.
Key features
- Gas-charged twin-tube design
- 10-stage velocity-sensitive valving
- 1 3/8 inch nylon-banded full displacement piston head
- Double welded shock mounts for strength
- Factory upper and lower mounts
- Not adjustable, with no remote reservoir
Caring for older Land Rover shocks
Shocks on older Land Rover models often work alongside aging bushings, mounts and suspension arms. Before fitting a new shock, check the rubber bushings for cracks, splitting or collapse, and look for play at the mounts when the vehicle is lifted. A tired bushing can allow knocking and uneven damping even when the new shock is sound.
Off-road use places repeated load on the rear suspension, so inspect the shock after heavy trail runs. Look for wet seals, dents in the body and any sign of heat discoloration. Rinse mud off the shaft after trail use, since grit on the shaft can wear the seal.
- Check rubber bushings for cracks or collapse
- Look for play at the mounts with the vehicle lifted
- Rinse grit from the shaft after trail use
- Replace worn bushings alongside the shock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924573 |
| UPC | 614901072952 |
| Shock series | ES9000 |
| Position | Rear |
| Type | Gas charged, twin tube |
| Extended length | 24.84 inches |
| Collapsed length | 14.82 inches |
| Travel length | 10.02 inches |
| Valving | 10-stage velocity sensitive |
| Piston head | 1 3/8 inch, nylon banded, full displacement |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Lift height listed | 3 inches |
Vehicle fitment
It fits the 1993 Land Rover Defender 110, the 1994–1995 and 1997 Defender 90, the 1994–1999 Discovery with the 1999–2000 Discovery Series II, the Range Rover from 1970–1974 and 1987–2000, and the 1993 Range Rover Sport.
Later Range Rover Sport years and Defender years outside those listed are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both mounts are factory style, so the shock uses the vehicle’s existing mounts. No mount adapters are listed.
What’s included
One rear shock absorber, sold as each.
Not included: the dust boot.








