Overview
The Pro Comp ES9000 shock absorber, part number 924515, is a white, nitrogen gas charged twin tube shock for the front of a vehicle. Pro Comp designed it for heavier loads and demanding driving, and says its tuning gives a comfortable highway ride along with better handling off road.
The shock uses 10-stage velocity sensitive valving, which changes damping with how fast the shaft moves, along with a 1-3/8 inch nylon banded full displacement piston. It has a stem upper mount, a loop lower mount and double welded shock mounts. It suits a 3 to 4 inch lift range.
Key features
- Nitrogen gas charged twin tube design
- 10-stage velocity sensitive valving
- 1-3/8 inch nylon banded full displacement piston
- Double welded shock mounts
- Front position, 3 to 4 inch lift range
- Stem upper mount and loop lower mount
Front shock role and upkeep
A front shock controls how quickly the front wheels rebound after a bump and helps the vehicle keep its nose level under braking. It also works with the steering system to reduce bump steer and wheel hop on rough ground. Because the front end carries much of the vehicle’s weight, a worn front shock is easy to feel in the steering wheel.
When fitting a new front shock, inspect the mounts and bushings at the same time. A cracked bushing can allow knocking that is mistaken for a failed shock. Check the steering components, tie rod ends and any track bar for play, since loose parts make a new shock feel less controlled.
- Look for fluid on the shock body and seals
- Check the stem and loop mounts for cracked bushings
- Listen for clunks over rough or washboard roads
- Replace front shocks in pairs for even steering feel
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924515 |
| UPC | 614901071917 |
| Series | ES9000 |
| Position | Front |
| Extended length | 24.70 inches |
| Collapsed length | 14.52 inches |
| Travel length | 10.18 inches |
| Upper mount | Stem |
| Lower mount | Loop |
| Piston | 1-3/8 inch nylon banded, full displacement |
| Gas charged | Yes |
| Adjustable | No |
| Remote reservoir | No |
| Shock finish | White |
| Boot included | No |
| Lift range | 3 to 4 inches |
| Sold as | Each |
Vehicle fitment
Fitment is not confirmed for a specific vehicle, year or chassis code. The shock suits a 3 to 4 inch lift range; confirm fit for your vehicle’s year, model and trim before ordering.
Compare the extended and collapsed lengths with the shock you are replacing before choosing this one.
Installation notes
Lift height and ride height decide whether a shock is the right length, so measure the old shock’s extended and collapsed lengths first and compare them with the 24.70-inch and 14.52-inch figures.
What’s included
One shock absorber in white. Shock boots are sold separately.
























