Overview
The Pro Comp ES3000 Series shock absorber, part number 332006, is a twin-tube gas shock designed for factory mounts. Its length is vehicle specific.
The shock uses 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. Those features are the same as the rest of the ES3000 range, so the choice between part numbers comes down to length and mounting.
Key features
- 10-stage velocity-sensitive valving that changes damping with speed.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop.
- Double-welded shock mounts.
- Limited lifetime warranty from Pro Comp Suspension.
Measuring before you buy
Shock length is the first thing to get right, because a unit that is too long can bind at full extension and one that is too short can bottom out or pull on the mounts. Measure the removed shock eye to eye at full compression and full extension, then compare those numbers with the new unit before ordering.
Mount position matters as much as length. Factory upper and lower mounts keep the shock aligned with the suspension, so misaligned hardware or bent brackets can make a correct length feel wrong. Check that the new unit moves freely through its range before the truck is driven.
- Note whether the shock is a front or rear unit
- Measure eye to eye at full compression and extension
- Look for bent brackets or worn bushings
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 332006 |
| UPC | 614901042955 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your truck before ordering, and check the length of the shock you are replacing.
Because the lengths depend on the vehicle, a match on the part number alone is not enough. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory mounts usually line up with the original shock position, but measure the full range of movement so the new unit does not bottom out or stretch past its travel.
What’s included
One ES3000 shock absorber.
Not included: the dust boot. The shock is sold without one.









