Overview
The Pro Comp ES3000 Series shock absorber, part number 336000, is a factory-mount replacement with vehicle-specific lengths. Confirm fit for your vehicle’s year, model and trim before ordering, and check the shock against the truck before buying.
It is built as a gas-charged twin-tube shock with 10-stage velocity-sensitive valving. The internal parts match the rest of the ES3000 line, which means the difference between part numbers is mainly the length and the mounting arrangement.
Key features
- 10-stage velocity-sensitive valving.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop.
- Double-welded mounts for strength.
- Limited lifetime warranty from Pro Comp.
Matching mount and length
Mount style and length work together, so a replacement shock must share both with the unit it replaces. Measure the original mount-to-mount distance with the truck at rest, then measure the new shock at both its compressed and extended positions. Note the stud or eye orientation before removing the old shock so the new one goes in the same way.
Shocks usually wear in pairs, so an axle with one new unit and one old one can feel uneven and pull under braking. Replacing both sides of an axle keeps damping matched. Inspect the mounting hardware and rubber components when the old shock comes off, since worn parts can change how the replacement sits.
- Measure the old shock at rest and extended
- Match stud or eye orientation
- Replace shocks in matched pairs when possible
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 336000 |
| UPC | 614901698695 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Body type | Hydraulic / gas charged |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the mounting length of the shock you are replacing, since the length depends on the vehicle.
Because the length depends on the vehicle, confirm the application before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the original shock’s mount-to-mount distance, then check the new shock’s compressed and extended lengths before removing the old unit.
What’s included
One ES3000 shock absorber.
Not included: the dust boot, since none is included with the shock.












