Overview
The Pro Comp 921513 is a rear ES9000 Series gas charged shock absorber for the 1990 to 2007 Toyota 4Runner and the 1988 to 1990 Toyota Land Cruiser, sold individually. It has a stem mount at the top and a loop mount at the bottom.
The shock is 21.75 inches extended and 13.06 inches collapsed, which gives 8.69 inches of travel. Pro Comp rates it for a 0 to 2.5 inch lift. The body is a twin tube design with a nylon banded piston head, double welded mounts and 10 stage velocity sensitive valving.
Key features
- Rear position for Toyota 4Runner and Land Cruiser
- Stem upper mount and loop lower mount
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
Stem and loop mounts explained
Stem and loop mounts use different hardware than a standard eye and bolt setup, and the bushing or sleeve that fits the loop eye is a common place for wear. Over time the rubber or polyurethane can crack, which lets the shock move and create clunking after bumps. Inspecting the bushing during each service and before a new shock is installed helps keep the rear end quiet and controlled.
Because the shock is not adjustable, the ride depends on the valving and the truck’s ride height. Rear springs, bump stops and suspension bushings often wear together with the shock, so they are worth checking during a replacement. If a lift or heavier tires are part of the build, confirm the shock still has room to cycle before tightening the mounts.
- Inspect loop bushings for cracks
- Check mounting hardware torque after install
- Look at rear bump stops for wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 921513 |
| UPC | 614901071313 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | 21.75 in |
| Collapsed length | 13.06 in |
| Travel length | 8.69 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Gas charged or hydraulic | Gas charged |
| Lift range | 0 to 2.5 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1990 to 2007 Toyota 4Runner in Base, Limited, SR5 and Sport versions, and the 1988 to 1990 Toyota Land Cruiser in Base trim.
Toyota 4Runner years before 1990 and after 2007, and Land Cruiser years outside 1988 to 1990, are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem and loop mounts are not the same as a standard shock, so check the mounting points on your truck before buying.
What’s included
One rear shock, sold as each. A boot is not included.











