Overview
The Skyjacker Softride Hydro Shock Absorber, part number H7097, is a front hydraulic twin-tube shock for the 1997-2003 Ford F-150 and the 2004 F-150 Heritage, built for vehicles with a 5 to 6 inch lift.
The H7097 belongs to the Skyjacker Hydro Series (H7000). It uses multi-stage velocity sensitive valving, a 5/8 inch diameter hardened and double chrome rod, red polyurethane bushings and a red boot. Skyjacker says 15 other colors are available and the shock carries a limited lifetime warranty.
Key features
- Twin tube construction with hydraulic action
- Multi-stage velocity sensitive valving
- Bonded iron piston
- 5/8 inch diameter hardened and double chrome piston rod
- Red polyurethane bushings
- Includes red boot
- Limited lifetime warranty.
- Supplied each; front position
Choosing a shock setup
A front shock controls how the axle and wheel move over bumps and during braking, so its damping matters more once a lift raises the suspension geometry. Hydraulic twin-tube units use fluid flow through valving to slow compression and rebound, and multi-stage valving changes that resistance with shaft speed, which helps on rough trail sections and on pavement. When a lift is installed, the shock length and travel should match the new ride height, and related parts such as control arms, bump stops and brake lines are often checked at the same time.
Inspect the shock regularly for oil seepage around the body and the rod, cracked or flattened bushings, and a torn boot that lets grit reach the rod. Worn bushings can cause clunking or sloppy steering, and a damaged boot exposes the chrome rod to dirt. Rinse mud from the rod after off-road use and re-check fasteners after the first few trail runs. Replace the pair of front shocks together so both sides damp the same way.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7097 |
| UPC | 803696171555 |
| Product type | Shock absorber |
| Series | Softride Hydro Series (H7000) |
| Position | Front |
| Construction | Twin tube |
| Action | Hydraulic |
| Piston | Bonded iron |
| Piston rod | 5/8 inch diameter, hardened, double chrome |
| Bushings | Red polyurethane |
| Boot | Red boot included |
| Lift height | For 5 – 6 in. lift |
| Supplied as | Each |
| Warranty (per manufacturer) | Limited lifetime warranty |
| Fitment type | Direct fit |
Confirm the weight and physical dimensions against your build if size or weight matters for your setup.
Vehicle fitment
The manufacturer fitment list for the Skyjacker H7097 shock covers:
- 1997–2003 Ford F-150 (Base, King Ranch, Lariat, XL, XLT)
- 2004 Ford F-150 Heritage (XL, XLT)
Compare part number H7097 with your vehicle’s year, model, trim, engine and drivetrain before ordering so you receive the correct part.
It fits the 1997-2003 F-150 and the 2004 F-150 Heritage only. Other F-150 generations and other Ford models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Professional installation is recommended for suspension, steering and brake components.
- Torque every fastener to specification and re-check it after the first miles of driving.
- Have the alignment checked after any suspension or steering work, and check that tires, hoses and lines have clearance through the full range of travel.
What’s included
One front shock absorber with red polyurethane bushings and a red boot.









