Overview
The 327510 is a rear ES3000 shock for a 0 to 2.5 inch lift. It is a twin tube cellular gas design and fits the 1997 to 2003 Ford F-150 and the 1997 to 1999 F-250.
The shock uses 10-stage velocity sensitive valving, which Pro Comp says responds to road conditions while improving handling. Pro Comp also offers its limited lifetime warranty on the ES3000.
Key features
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- 5/8-inch chrome hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Limited lifetime warranty
Rear shock damping
Rear shocks control how the axle settles after a bump and how the body rocks under a load. A rear shock with the right valving keeps the tires in contact with the road, and a twin tube body helps hold damping steady as the shock warms up on long drives. Rear shocks usually wear faster than front ones when the truck carries weight in the bed.
Rear shocks on the same axle wear at similar rates, so replacing both sides together keeps the ride balanced. Rubber bushings at the eyes and any worn bump stops should be checked at the same time, since a loose eye lets the shock knock and shortens its service life.
- Replace rear shocks in pairs where possible
- Look for oil on the body and the rod
- Check eye bushings for splits
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 327510 |
| Series | ES3000 |
| Position | Rear |
| Lift | 0 to 2.5 inches |
| Length, extended, collapsed and travel | Vehicle specific |
| Upper and lower mounts | Factory |
| Adjustable | No |
| Finish | White |
The ES3000 is a twin tube cellular gas design, and the 327510 uses that design as a rear shock for the 0 to 2.5 inch lift range. The 10-stage velocity sensitive valving adjusts the damping as the suspension moves, and a Teflon rebound stop is built in to control the rebound at the end of the stroke. The 5/8 inch chrome hardened piston rod carries the load through the shock, and the double welded mounts are rated by Pro Comp for strength.
The lengths are vehicle specific, so check the extended and collapsed measurements of the original shock before ordering. The F-150 and F-250 fit covers the years and trims shown below.
Vehicle fitment
It fits the 1997 to 2003 Ford F-150 in the Base, King Ranch, Lariat, XL and XLT trims, and the 1997 to 1999 Ford F-250 in the Base, Lariat, XL and XLT trims.
The list does not include the F-250 for 2000 and later, or the F-350. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear ES3000 shock.










