Overview
The Pro Comp ES9000 part 927710 is a rear gas-charged shock absorber for the 2005–2015 Toyota Tacoma. The shock is designed for a vehicle with a 6 inch lift and has 11.49 inches of travel.
Like the other ES9000 shocks, this unit combines a twin-tube body with 10-stage velocity-sensitive valving. The valving is designed for a comfortable ride on the road and better handling on rough ground. The piston head is 1 3/8 inch and nylon-banded, and the shock mounts are double-welded.
Key features
- Rear placement for a 2005–2015 Toyota Tacoma
- 10-stage velocity-sensitive valving in a twin-tube body
- Full-displacement piston head with a nylon band
- Double-welded mounts and a white finish
Rear shocks on a Tacoma
The rear shocks on a Toyota Tacoma help control the bed’s movement when the truck is loaded or driven over washboard surfaces. They work with the leaf springs, axle and rear bump stops to keep the back end settled over bumps. A rear shock with weak damping often shows up as a bounce that continues after the road surface has smoothed out.
If you carry a camper, tools or a hitch load, the rear shocks spend more time under strain, so inspect them regularly. Check the bushings at both ends and the bump stops for wear. Rear shocks are often replaced in pairs so the rear end rides evenly.
- Check bushings for splits
- Inspect bump stops for cracking
- Look for fluid on the shock body
- Replace rear shocks in pairs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 927710 |
| UPC | 614901144857 |
| Shock series | ES9000 |
| Position | Rear |
| Lift height | 6 in. |
| Extended length | 27.29 in. |
| Collapsed length | 15.80 in. |
| Travel | 11.49 in. |
| Gas charged | Yes |
| Piston head | 1 3/8 in., nylon-banded, full displacement |
| Upper and lower mounts | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
Vehicle fitment
This rear shock covers the 2005–2015 Toyota Tacoma, including Base and PreRunner models.
Toyota Tacoma model years before 2005 and after 2015 are not on this list, and neither are other Toyota trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the 27.29 in. extended and 15.80 in. collapsed lengths match the rear shock you are replacing, because the unit is designed for a 6 inch lift.
What’s included
This is a single rear shock, and the boot is not included.





