Overview
The Pro Comp ES3000 Series shock absorber 322518 is a white, non-adjustable twin tube gas shock with a stem upper mount and a loop lower mount. It has an extended length of 22.75 inch, a collapsed length of 13.54 inch and a travel length of 9.21 inch.
The ES3000 has 10 stage velocity sensitive valving, a 5/8 inch chrome hardened piston rod and a Teflon rebound stop. Confirm fit for your vehicle’s year, model and trim before ordering.
The 322518 has a stem upper mount and a loop lower mount, so the mounting hardware on your vehicle must match both. Compare the lengths and mount types with your vehicle before installing.
Key features
- Twin tube cellular gas design
- 10 stage velocity sensitive valving
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Limited lifetime warranty stated by Pro Comp
- Stem upper mount and loop lower mount
- Non-adjustable, no remote reservoir
Measuring before you buy
Measuring the old shock is the most reliable way to confirm a replacement. Measure the collapsed length and the extended length, eye to eye, with the vehicle sitting at its normal height. Note the upper and lower mount styles too, since a shock with the right length can still fail to bolt on if the mount type differs.
Gas-charged and hydraulic shocks can feel different on the road, and the difference matters most on rough surfaces where damping control is tested. Consider how you drive before replacing: highway driving, towing and off-road trails place different demands on the damping. A rebound stop also limits how far the shock can extend, which affects how the suspension behaves at full droop.
- Measure eye to eye when collapsed and extended
- Match the upper and lower mount styles
- Check hardware and bushings at both ends
- Replace in pairs on the same axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 322518 |
| UPC | 614901041750 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas |
| Extended length | 22.75 inch |
| Collapsed length | 13.54 inch |
| Travel length | 9.21 inch |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
| Fit type | Direct Fit |
Vehicle fitment
Check the vehicle year, model and trim against the shock’s lengths and mount types before ordering.
Compare the shock’s lengths and mount styles with your vehicle, and confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Suspension work affects steering, braking and stability, so professional installation is recommended unless you have the tools and experience to do it safely. Support the vehicle on jack stands, never on a jack alone, and have the alignment checked after any suspension work. Check local regulations on lift height and re-check fasteners after the first miles. Compare the extended and collapsed lengths and mount styles with your vehicle’s requirements, and check whether a pair is needed since the shock is sold as each.
What’s included
One shock, sold as each. Shock boots are not included.









