Overview
The ZX2080 is a front Pro Runner SS monotube shock absorber for vehicles with 0 to 2.5 inches of lift. It fits the 2003–2015 Toyota 4Runner, the 2007–2014 Toyota FJ Cruiser and the 2005–2016 Toyota Tacoma.
The gas-charged monotube body is designed to resist cavitation during compression and rebound, and it sheds heat more efficiently than a traditional twin tube hydraulic shock. Multi-stage valving is tuned to each application, and the body is zinc plated and clear coated.
The 0 to 2.5 inch lift range makes the ZX2080 a match for trucks and SUVs with stock to modest lift. The monotube body separates the oil and gas with a floating piston, and the nitrogen charge keeps the oil under pressure, which is the mechanism Pro Comp credits for reducing cavitation during compression and rebound.
Key features
- Front position, direct fit
- Designed for 0 to 2.5 inch of lift
- Gas charged monotube with nitrogen pressurization
- Multi-stage valving tuned to the application
- Zinc plated, clear coated finish
Trail use at modest lift
Modest lift changes how a shock works through its range, so a shock sized for 0 to 2.5 inches keeps damping and geometry closer to stock. Monotube bodies handle repeated compression on rough trails by keeping oil under nitrogen pressure, which helps limit foaming on longer runs. Overheating shows up as fade, where the ride feels softer after a long descent.
Check bushings and mount hardware at each service, since worn parts can make a new shock feel loose or noisy. If the vehicle is lifted near the top of the range, the front springs, control arms and bump stops can be worth reviewing at the same time so the shock is not working outside its intended travel.
- Recheck mount torque after the first trail runs
- Inspect bushings at each service
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2080 |
| UPC | 614901083118 |
| Shock series | Pro Runner SS |
| Position | Front |
| Lift height | 0 to 2.5 in. |
| Body | Monotube, gas charged |
| Finish | Zinc plated, clear coated |
Vehicle fitment
It is a direct fit for the 2003–2015 Toyota 4Runner, 2007–2014 Toyota FJ Cruiser and 2005–2016 Toyota Tacoma, each at 0 to 2.5 inches of lift.
The 4Runner range ends with 2015 and the Tacoma range ends with 2016 on this list. The Toyota Tundra is not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front Pro Runner SS monotube shock, sold as each.












































