Overview
The Pro Comp Suspension ES3000 320510 is a front hydraulic shock absorber for the 1997–2002 Ford Expedition, the 1997–2003 Ford F-150, the 1997–1999 Ford F-250, the 1989–1998 Suzuki Sidekick, the 1996–1998 Suzuki X-90 and the 2005–2015 Toyota Tacoma. The shock is zinc finished rather than white, which is the main visual difference from the other ES3000 sizes.
It measures 20.59 in extended and 12.70 in collapsed, with 7.89 in of travel. Loop mounts sit at both ends, and Pro Comp rates the shock for 0 to 1 in. of lift. The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop, and it carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Zinc finish
- Pro Comp Suspension limited lifetime warranty
On the trail
A shock absorber controls how quickly the spring compresses and rebounds, which keeps the tires in contact with the ground over washboard and ruts. On the trail a shock that is worn out lets the axle hop and can make steering feel vague at speed. Good damping also protects the mounts and bushings from repeated hard impacts.
When a front shock wears, the change tends to show up gradually. Look for fluid streaks along the body, a rolling or floating feel after bumps, and tires that wear faster on one edge. Check the upper and lower mounts for cracked rubber or loose hardware at the same time, because a worn bushing can make a new shock feel like it is not working.
Shocks are usually replaced in pairs on the same axle so the damping matches side to side. When the front end is apart, it is also worth checking the steering stabilizer and ball joints, since they often wear together on higher-mileage trucks.
- Fluid leaking down the shock body
- Bouncing or rolling after bumps
- Uneven front tire wear
- Worn mount bushings or loose hardware
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 320510 |
| UPC | 614901041156 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 20.59 in |
| Collapsed length | 12.70 in |
| Travel length | 7.89 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Lift height rating | 0 to 1 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | Zinc |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1997–2002 Ford Expedition (Eddie Bauer and XLT), the 1997–2003 Ford F-150 (Base, King Ranch, Lariat, XL and XLT), the 1997–1999 Ford F-250 (Base, Lariat, XL and XLT), the 1989–1998 Suzuki Sidekick (JA, JL, JLX, JLX Sport, JS, JX and JX Sport), the 1996–1998 Suzuki X-90 (Base and SE) and the 2005–2015 Toyota Tacoma (Base and X-Runner).
Ford Expeditions from 2003 and later, Suzuki Sidekick and X-90 models from 1999 and later, and Toyota Tacoma models from 2016 and later are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 0 to 1 in. lift rating points to trucks at or near stock height. Compare the 20.59 in extended and 12.70 in collapsed lengths with the shock you are removing, and check the loop mounts against your mounting points before fitting.
What’s included
One shock absorber, part 320510, in zinc finish.
Not included: the dust boot.












