Overview
The Pro Comp Suspension ES3000 323500 is one hydraulic shock absorber from the ES3000 Series, sold individually. It uses the factory upper and lower mounts, and its extended, collapsed and travel lengths are set to the vehicle. No make, model or year is named for this part number.
The ES3000 is built as a twin tube cellular gas design. Its 10-stage velocity-sensitive valving changes damping with road conditions, and the 5/8 inch chrome-hardened piston rod with a Teflon rebound stop is part of the same build. Double welded mounts add strength, and the shock is covered by the Pro Comp Suspension limited lifetime warranty. Sold individually, the unit is one shock, not a pair.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- Sold individually
- Pro Comp Suspension limited lifetime warranty
Measuring before you order
Because this shock is sold individually and its lengths depend on the vehicle, measuring the old unit is the most reliable way to check the match. Measure the extended and collapsed lengths with the shock removed, and note the travel. Look at the mount style at both ends, since factory mounts can differ in bushing type and eye size.
Keep the old shock on hand until the new one is confirmed. Note any stamped codes or part numbers on the old unit, and photograph the mounting points before removal. Compare these details with the new unit before fitting, and check that the spring and bump stop setup is unchanged.
- Extended and collapsed length
- Mount style and bushing type at each end
- Stamped codes or part numbers on the old unit
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 323500 |
| UPC | 614901072976 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Single shock, sold individually |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the factory mounts and vehicle-specific lengths with the shock on your vehicle before purchase.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 323500.
Not included: the dust boot.











