Overview
The Pro Comp ES9000 Series front shock absorber, part number 914517, fits 1972 to 1993 Dodge D-series pickups, including the D100, D150, D200, D250, D300 and D350. It is rated for 0 to 2 in. of lift and uses factory upper and lower mounts. Its extended length is 14.71 in. and its collapsed length is 9.56 in.
It is a twin-tube, gas-charged design with 10-stage velocity-sensitive valving and a nylon-banded piston head. Double-welded mounts add strength, which suits older D-series trucks that see heavy use.
Key features
- Twin-tube, gas-charged design.
- 10-stage velocity-sensitive valving.
- A nylon-banded piston head.
- Double-welded shock mounts.
- Factory upper and lower mounts.
Inspecting old D-series mounts
D-series trucks from these years often have mounts and bushings that have dried, cracked or worn loose over decades of use. A new shock cannot correct a mount that has moved, so inspect the upper and lower attachment points before fitting anything. Check the frame brackets for rust and the axle mounts for movement, since either can throw off the shock’s working position.
Heavy use and older suspension parts make damping more important, because worn components let the axle move more freely and load the shock harder. Double-welded mounts add strength at the attachment points, which helps on trucks that carry tools, trailers or farm loads. Replace worn bushings and springs at the same time as the shock when the truck shows sag or loose handling.
- Check frame brackets for rust or cracks
- Look for oil on the shock body after a drive
- Inspect axle mounts for movement
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 914517 |
| UPC | 614901070255 |
| Shock series | ES9000 |
| Extended length | Vehicle specific (description gives 14.71 in.) |
| Collapsed length | Vehicle specific (description gives 9.56 in.) |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Position | Front |
| Lift rating | 0 to 2 in. lift |
| Hydraulic / gas charged | Gas charged |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1972 to 1979 and 1984 to 1989 Dodge D100 pickups, the 1977 to 1993 D150 trucks, the 1972 to 1980 D200 and D300 trucks, and the 1981 to 1993 D250 and D350 trucks.
The list covers only the Dodge D-series and has no entries for the 1994 and newer Dodge Ram trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
D-series trucks from these years can have worn factory mounts, so inspect them before fitting the new shock. Check the full travel against the axle and frame once installed.
What’s included
One ES9000 front shock absorber.
Not included: a dust boot.












